[ closed ] Olympus Announces its latest Micro4/3 camera and lenses - OM-D


Status
Not open for further replies.
the FL600 flash unit can tilt and rotate

FL-600_front_bounce.jpg


FL-600_side.jpg


the little flash can be tilted up-down .... tilt UP to activate the flash
OMD_front_lens_flash-up.jpg


OMD_front_lens_flash-down.jpg
 

Last edited:
Which camera you have used where the tilting screen spoilt? Nikon or Canon. I have the EPL3, E620, E3 and the E5, never had a problem with the tilting screens. :-) If you dun like the screen, then pretend that it is not tiltable and keep it stowed all the time. One reason why I got the EPL3 after getting the EP3, was because of the tilting screen. The other reason was the smaller size and lighter weight.

hmm never used any before. but I am thinking along the line... one day if you are using the tilting screen, accident happen when someone bump into your camera and spoilt the tilting mechanism... then extra cost to repair.
 

ed9119,
Is the addon grip made of magnesium alloy?
What was the EVF like? Did you manage to test the camera with 4/3 lenses?
Thanks!
 

hmm never used any before. but I am thinking along the line... one day if you are using the tilting screen, accident happen when someone bump into your camera and spoilt the tilting mechanism... then extra cost to repair.

well it is an accident and quite unfortunate if it happens, its a risk against the better functionality.

I use the e30 and love the flip screen's applications but when I think about it, the E-m5's type of flip screen would fill the function of a tilting screen in 85+% of situations.
 

ed9119,
Is the addon grip made of magnesium alloy?
What was the EVF like? Did you manage to test the camera with 4/3 lenses?
Thanks!

- the grip felt hefty and well built but did not get to inspect it closely if its also magnesium alloy
- for sure, the EVF was bright .... wong_se felt Olympus should have made it bigger ..... its an EVF so dont know if Oly will address it in its production unit
- LOVED the diopter for the evf ..... 4 elements .... very easy on the eye and easy to fine-tune

switching between evf and LCD screen is auto-detect

eyecup_EP-11.jpg


HLD-6G_6P_best_back_b.jpg
 

Last edited:
- the grip felt hefty and well built but did not get to inspect it closely if its also magnesium alloy
- for sure, the EVF was bright .... wong_se felt Olympus should have made it bigger ..... its an EVF so dont know if Oly will address it in its production unit
- LOVED the diopter for the evf ..... 4 elements .... very easy on the eye

Any idea wheher the 2 grips can be purchased separately or as a set?
 

hmm never used any before. but I am thinking along the line... one day if you are using the tilting screen, accident happen when someone bump into your camera and spoilt the tilting mechanism... then extra cost to repair.

I think for you, just use superglue to glue the tilt screen so that it can never be tilted. In that way, there will never be a chance that you will tilt it, and someone come and bump and break your tilting mechanism. Isn't that a better solution than grousing about Olympus making the E-M5 with a tilt screen. I definately like the added functionality of the tilt screen and have never had a situation when an accident happened to my screen. This would be the last thing I would complain about the camera. In fact, I wished that it were more than tilt. But I am not complaining. I think they have done a good job trying to please the masses. Of course, as you can see, you can NEVER please everyone. :-)
 

I think for you, just use superglue to glue the tilt screen so that it can never be tilted. In that way, there will never be a chance that you will tilt it, and someone come and bump and break your tilting mechanism. Isn't that a better solution than grousing about Olympus making the E-M5 with a tilt screen. I definately like the added functionality of the tilt screen and have never had a situation when an accident happened to my screen. This would be the last thing I would complain about the camera. In fact, I wished that it were more than tilt. But I am not complaining. I think they have done a good job trying to please the masses. Of course, as you can see, you can NEVER please everyone. :-)

no need to use superglue, just don't use the tilted screen will solve the problem.

or can use double sided tape. use superglue will have problem selling the camera next time.
 

so when is this camera reaching our stores in Singapore?
 

It has begun. Mirrorless cams are starting to eat into the world of pro DSLRs as well! :D
 

I dont think M4/3 is going to eat into high-end DSLRs yet ...... eat into the entry level DSLRs more likely .....
 

so when is this camera reaching our stores in Singapore?

mid to end march in 3 types of combinations ..... read the Interview with Terada for more information please thanks :)
 

I don't think so...
But it is definitely going to eat into the budget-level (1100D, D3100) and entry-level (600D, D5100) DSLR markets. In fact, as the owner of an enthusiast-level (60D, D7000) DSLR, I am very tempted - even more so than when GX1 was released. I think the m4/3 BBB has been attacking me relentlessly in the last few months!

At 425g with battery, the EM-5 is a heavyweight among m4/3 cameras (although it is very light compared to a DSLR). Its USD999 body-only MSRP is also higher than entry-level DSLRs. So it better has the performance to justify the heft and the price. ;)
 

That one I agree...


I dont think M4/3 is going to eat into high-end DSLRs yet ...... eat into the entry level DSLRs more likely .....

But it is definitely going to eat into the budget-level (1100D, D3100) and entry-level (600D, D5100) DSLR markets. In fact, as the owner of an enthusiast-level (60D, D7000) DSLR, I am very tempted - even more so than when GX1 was released. I think the m4/3 BBB has been attacking me relentlessly in the last few months!

At 425g with battery, the EM-5 is a heavyweight among m4/3 cameras (although it is very light compared to a DSLR). Its USD999 body-only MSRP is also higher than entry-level DSLRs. So it better has the performance to justify the heft and the price. ;)
 

Any idea wheher the 2 grips can be purchased separately or as a set?

I am guessing as a set because the securing screw lock on the bottom half is not aligned to the screw hole at the bottom of the camera

The bottom half of the grip cant fit onto the bottom of the camera

See below

HLD-6G_6P.jpg
 

Last edited:
What I mean to say is that eventually mirrorless cameras are likely to replace DSLRs.

At present DSLRs still have superior battery life and AF speeds. But I think it's just a matter of time before mirrorless overtakes DSLRs in these aspects.

Aside from the obvious weight and bulk benefits, there is also no need to calibrate lenses.

My APS-C based NX10 has served me well for the last 2 years and I've taken some great photos with it - some that have won competitions. That's because I carry my cam with pancake 30mm everywhere in my bag. The camera is so light and small that I sometimes forget it's even there. I don't even need a padded expensive camera bag as the camera fits snugly inside an inner pocket and is protected well enough.

So not only have I saved costs in camera luggage. I shoot more and get more winning shots because I have the camera with me all the time. I also don't stand out as an obvious photographer with expensive steal-able gear. All the while I enjoy the benefits of a proper APS-C sensor.

About a year back I said, in the "How to choose a cam" sticky thread in the "Newbies" forum, that it is likely that mirrorless bodies will come equipped with more professional features in time to come. It's nice to see that this is now happening.

Exciting stuff actually!!! :D
 

Last edited:
Shahmatt said:
What I mean to say is that eventually mirrorless cameras are likely to replace DSLRs.

At present DSLRs still have superior battery life and AF speeds. But I think it's just a matter of time before mirrorless overtakes DSLRs in these aspects.

Aside from the obvious weight and bulk benefits, there is also no need to calibrate lenses.

My APS-C based NX10 has served me well for the last 2 years and I've taken some great photos with it - some that have won competitions. That's because I carry my cam with pancake 30mm everywhere in my bag. The camera is so light and small that I sometimes forget it's even there. I don't even need a padded expensive camera bag as the camera fits snugly inside an inner pocket and is protected well enough.

So not only have I saved costs in camera luggage. I shoot more and get more winning shots because I have the camera with me all the time. I also don't stand out as an obvious photographer with expensive steal-able gear. All the while I enjoy the benefits of a proper APS-C sensor.

About a year back I said, in the "How to choose a cam" sticky thread in the "Newbies" forum, that it is likely that mirrorless bodies will come equipped with more professional features in time to come.

Exciting stuff actually!!! :D

The fastest af speeds are alrdy in the MILC
 

Yesterday... my heart melted when I saw the D800 announcement.... now... I cannot even remember how the D800 looks...... becos this OM-D has always been something I am dreaming of!!!!!! Wow!!!!!!! :thumbsup::thumbsup::thumbsup:
 

Status
Not open for further replies.
Back
Top