faithsilence
New Member
wait for 10 yrs later, LX-20? then. Cfm good buy than the LX-3 now.
LX3 Users Discussion.
- Thread starter CYRN
- Start date
- Status
wait for 10 yrs later, LX-20? then. Cfm good buy than the LX-3 now.
littlegreenyoda
New Member
what settings should i use to take photos of my dog?
it moves around very frequently and fast.
Would like to take indoor shots and without flash.
After going through the whole manual!
Got a few noob questions to ask..
1. Under AP mode, the figure below F2.0 (can be adjusted using the joystick) means aperture length or focal length?
2. Under SP mode, the figure 1/10 means shutter speed??
3. Manual Exposure: what are the two adjustable figures below?
4. What is the use of the small "Focus" button
it moves around very frequently and fast.
Would like to take indoor shots and without flash.
After going through the whole manual!
Got a few noob questions to ask..
1. Under AP mode, the figure below F2.0 (can be adjusted using the joystick) means aperture length or focal length?
2. Under SP mode, the figure 1/10 means shutter speed??
3. Manual Exposure: what are the two adjustable figures below?
4. What is the use of the small "Focus" button
Last edited:
A question on Extra Optical Zoom (EZ) on the LX3.
Some say it is cropping, just like we take the photo and crop it on a PC. But isn't the extra zoom (e.g. 60mm vs 100mm) will create a different perspective from simply cropping? Please correct me if I have a wrong understanding.
I can only get the EZ in iA mode. In other mode (e.g. P), even though I set at lower resolution, the zoom stays at 2.5x. Is that correct?
Thanks.
Some say it is cropping, just like we take the photo and crop it on a PC. But isn't the extra zoom (e.g. 60mm vs 100mm) will create a different perspective from simply cropping? Please correct me if I have a wrong understanding.
I can only get the EZ in iA mode. In other mode (e.g. P), even though I set at lower resolution, the zoom stays at 2.5x. Is that correct?
Thanks.
lichtleiter
Deregistered
Panasonic announces firmware update for DMC-LX3 V1.3
http://panasonic.jp/support/global/cs/dsc/download/LX3/index.html
http://panasonic.jp/support/global/cs/dsc/download/LX3/index.html
I don't see 1.3 in your link?
ralliart12
New Member
According to DPReview I tink it'll only be released on 1st Jun
Any advice?
I mentioned in my earlier post that I only see EZ in iA mode, that's why asking for help here. And also asked on perspective when using EZ. But so far no luck in getting the answers
lichtleiter
Deregistered
The V1.3 firmware is available for download now
http://panasonic.jp/support/global/cs/dsc/download/LX3/index.html
Here are the improvements:
Improved auto white balance performance.
Improved auto white balance performance in sunset mode.
Improved recovery operation from unremoved lens cap.
Improved operation of MF ASSIST/AF area selection.
Improved display of Manual Exposure Assistance.
Last edited:
christopherchen
Member
Hi, I just got LX-3 for a trip. I have a problem with the review image looking underexposed when viewed in REC mode using the bottom button compared with going into Playback mode.
When using the function button in REC mode the image is much darker than the same one viewed in Playback mode.
It seems there was another CSer here with the same problem. Is this normal, or is my unit defective?
When using the function button in REC mode the image is much darker than the same one viewed in Playback mode.
It seems there was another CSer here with the same problem. Is this normal, or is my unit defective?
lichtleiter
Deregistered
REC and Playback mode of my LX3 shows same image.
No abnormalities of underexposed or overexposed.
Mine doesnt have this problem.
Think what you need to do is go to REC mode, then go into menu, then go into setup, then go into LCD MODE , then set to the 3rd options (From top to bottom, the last one). Think shld solve your problem.
Last edited:
- Status
Similar threads
