yo dudes .... based on ALL your inputs...I have just completed re-creating a BOOT DISK for my 'operation' on my precious
I shall be doing the following :
1. Boot up system with BOOT DISK
2. At command prompt, execute "format c: /u /q"
3. After FORMAT, execute "fdisk /mbr" ( QUESTION : this command should not affect my second HARDDISK, D Drive, right ? ) or I need to execute "fdisk c: /mbr" ???
4. Do I really need to partition my harddisk ????
5. Disconnect ALL internet connections and insert WIN98SE CD-ROM for re-installation
6. After installation of OS, drivers and necessary applications, create an IMAGE on the HD aka RECOVERY CDR or DVDR
7. Install ANTI-VIRUS Programme
8. Connect to INTERNET and download latest virus definitions/ updates
9. Run STINGER again ( QUESTION : is this necessary ? )
10. If all else fail, contact JSBN and JBMA ;p
End of Operation
Did I miss out anything ? :sweat: I trust these steps should be adequate and correct.
BTW, any quick way to backup configurations ? e.g. internet connection configurations, IP addresses etc.
I shall be doing the following :
1. Boot up system with BOOT DISK
2. At command prompt, execute "format c: /u /q"
3. After FORMAT, execute "fdisk /mbr" ( QUESTION : this command should not affect my second HARDDISK, D Drive, right ? ) or I need to execute "fdisk c: /mbr" ???
4. Do I really need to partition my harddisk ????
5. Disconnect ALL internet connections and insert WIN98SE CD-ROM for re-installation
6. After installation of OS, drivers and necessary applications, create an IMAGE on the HD aka RECOVERY CDR or DVDR
7. Install ANTI-VIRUS Programme
8. Connect to INTERNET and download latest virus definitions/ updates
9. Run STINGER again ( QUESTION : is this necessary ? )
10. If all else fail, contact JSBN and JBMA ;p
End of Operation
Did I miss out anything ? :sweat: I trust these steps should be adequate and correct.
BTW, any quick way to backup configurations ? e.g. internet connection configurations, IP addresses etc.