eleveninth
Senior Member
It is. I don't know if the cosplayers really look that gd or you made them look that good. Honestly i haven't seen alot of sg cosplayers that look this gd :thumbsup:
S'pore Strobists?
- Thread starter flipfreak
- Start date
It is. I don't know if the cosplayers really look that gd or you made them look that good. Honestly i haven't seen alot of sg cosplayers that look this gd :thumbsup:
eleveninth
Senior Member
Btw guys, Anyone have experience with a G10. Whats the maximum sync speed it can achieve. 1/1000th with PWs w/ external flash?
similiarly the LX3. its maximum speed with triggers.
similiarly the LX3. its maximum speed with triggers.
flipfreak
Senior Member
g10 is 1/250
eleveninth
Senior Member
hmm isn't that on cam external? i know internal syncs at 1/500th while external 1/250th but im reading things that it can sync higher with triggers. So wondering if anyone has tried it here.
chalib: Thanks.
flipfreak
Senior Member
nope. why shld it be any different unless u referring to HSS?
eleveninth
Senior Member
the electrical shutter? Not sure, havent really used HSS before.
flipfreak
Senior Member
the manual reads 1/250 as the sync speed. where did u see 1/500? u probably can sync higher but at your own risk i guess. the shoot we did last weekend, melvin managed to sync higher than the specs.
eleveninth
Senior Member
Thats gd news. Choosing between an LX3 and a G10. I'm leaning towards a G10, just checking some stuff before i get it.
was reading on another forum, At work now so i dont have my history will link it tmr when i get back.
Last edited:
jungsangchoe
Senior Member
ooh G10 !!
need some help from you guys - i know for my sb800, it comes with 3 colour correction gels.. tho i have yet to use them. after watching all the stuff from joe mcnally, i wonder if i can just cut up some celophane paper and get roughly the same results for my 1-pin slave flash?
TIA!
TIA!
eleveninth
Senior Member
need some help from you guys - i know for my sb800, it comes with 3 colour correction gels.. tho i have yet to use them. after watching all the stuff from joe mcnally, i wonder if i can just cut up some celophane paper and get roughly the same results for my 1-pin slave flash?
TIA!
It might melt on to your flash head i think.
flipfreak
Senior Member
need some help from you guys - i know for my sb800, it comes with 3 colour correction gels.. tho i have yet to use them. after watching all the stuff from joe mcnally, i wonder if i can just cut up some celophane paper and get roughly the same results for my 1-pin slave flash?
TIA!
no. color temp is diff. unless u wanna do some special effect then can use. or u can cut up those colored folders. color folder will be closer than cellophane.
there is a high possibility if you use cellophane sheets near or touching the flash head. take extra precaution on that.
i have had tissue paper emitting a burnt smell after a few rapid fire of the flash. :bsmilie:
specialized gels made for stage lighting are designed to withstand the heat from these hot lamps. you may want to consider these.
thanks guys!
I managed to syn my 5DMkii with the pocket wizard triggered flash with 1/250.
eleveninth
Senior Member
my mark 1 can syncs at 1/200th. Anyway i just got the G10, have yet to try it out.
flipfreak
Senior Member
must pay school fees. :bsmilie:
Similar threads
