CPU is seated correctly. checked a few times. PSU fan, GFX fan, Extra cooling fan all running except for processor fan. i'm worried about the shorting out issue. wad would normally cause short circuiting?
plan to haul my rig down to my friend's place to do a component by component test tmw. He has a similar core2quad desktop. i sincerely hope its the mobo that's fried and not the processor..
onboard LED for motherboard is lit when i switch on the PSU.
CPU is seated correctly. checked a few times. PSU fan, GFX fan, Extra cooling fan all running except for processor fan. i'm worried about the shorting out issue. wad would normally cause short circuiting?
plan to haul my rig down to my friend's place to do a component by component test tmw. He has a similar core2quad desktop. i sincerely hope its the mobo that's fried and not the processor..
onboard LED for motherboard is lit when i switch on the PSU.
just got back from my buddy's place. Processor's working fine. when load into his dell, can boot up till desktop. Ram and graphics card also can boot up till desktop. So i guess the mobo's the one that's broken. when connect new PSU still cannot hear any beep sound and the bios won't load at all. I'm going to call the shop that i bought the mobo from to check about RMAing the board. Processor's fan still not working. i think maybe the fan circuit got fried along with the board. :dunno:
So i guess the mobo's the one that's broken.
Maybe they want to test them out themselves before doing the RMA. Just bring them lor.The shop told me to bring my processor and ram down with the mobo. is this the SOP?
If you already remove then return to them removed and tell them you have tested processor is OK just mobo is bad. Tell them you test processor with your friend's mobo which is good.ok.. 1 other question. should i remove the CPU and return to the box and cover the processor slot with the cover or i just leave it there with the processor fan removed?
today is the 8th day. Initially they din want to change, but after that the shop did a 1 to 1 exchange for me. Its the 4 pin for the processor fan that is damaged. After changing a new board, everything's fine now. :bsmilie: Now using the new computer. :thumbsup: Thanks to everyone for all their advice and pointers.