LX3 Users Discussion.


Status
Not open for further replies.
hi guys..sorry if this been raised before but is there a compatible remote control for the LX series?
 

any pouch to recommend for lx-3 with lens hood adaptor?
also any underwater pouch to recommend for this cam wif the lens hood attached?
 

Last edited:
Hi.. I hv two problems with my lx3 here. Appreciate some advise.....

1) When using iA, I noticed the picture always turn out either too bright or two dim. Since it's supposed to be autonatic, I'm not sure if there's anything I could set abt it.

2) When using the A, S or M mode, I noticed there's an indicator (-2, -1, 0, 1, 2) appearing on the screen when I half press the shutter. Is that the esposure metering? It always turns out to be either on the negative or positive side. I've tried balancing it (so it'll hit 0) by adjusting the apperture/shutter setting but I noticed it did nothing to the value shown earlier. I'm not sure if it's bcos of anything that I have not done right. Anyone with similar problems? Please assist. :cry:
 

Juz wan to check... I'm lookin for a second batt + charger...

Batt I'll go wif the original.

Charger.. does it hav alternative / cheaper brand?

Where to get the best deal?
 

Hi.. I hv two problems with my lx3 here. Appreciate some advise.....

1) When using iA, I noticed the picture always turn out either too bright or two dim. Since it's supposed to be autonatic, I'm not sure if there's anything I could set abt it.

2) When using the A, S or M mode, I noticed there's an indicator (-2, -1, 0, 1, 2) appearing on the screen when I half press the shutter. Is that the esposure metering? It always turns out to be either on the negative or positive side. I've tried balancing it (so it'll hit 0) by adjusting the apperture/shutter setting but I noticed it did nothing to the value shown earlier. I'm not sure if it's bcos of anything that I have not done right. Anyone with similar problems? Please assist. :cry:

I suggest you read the manual regarding exposure compensation. ;)
 

No photo samples yet.

Looks good. But she have to go for the 3MP EZ resolution to clear the vignetting issue. Can't imagine if a 2x or more tele is used. I guess the vignetting issue will be worst. Oh well, guess can't push this camera too far.

Last time for my LX2, I used the Camera Devices charger sold by Eastgear.

The LX3 is using the same battery as the LX2.

HTH.

Juz wan to check... I'm lookin for a second batt + charger...

Batt I'll go wif the original.

Charger.. does it hav alternative / cheaper brand?

Where to get the best deal?
 

Last edited:
Can ask hw u guys resize ur pics b4 posting to Clubsnap Gallery? Anyone using provided software?
 

No photo samples yet.

Actually, this person who posted using the TC-15ED also posted in DPreview. There are some photo samples taken with 3MP EZ and with the Teleconverter on. It does look sharper. But too bad the resolution is 3MP. It will be good if it is 6MP. But can see that the 'bokeh' is there. But not sure if she (i believe its a she), used Macro mode to achieve that or by spot focusing the subject to achieve that.
 

anyone keen to share lx-3 compatible battery @ $13 each? got lobang to get @ this price but need to get minimum 2 pieces
 

hi there everyone,

am just wondering what kind of setup i will need for macro photography other than the LX3 itself. need it to take photos of the product i am selling so i can pass them on to my clients. Crisp details will be my objective.
 

Last time for my LX2, I used the Camera Devices charger sold by Eastgear.

The LX3 is using the same battery as the LX2.

HTH.

thanks. will check EG out.
 

the battery i can get has a power rating of 1400mah though not sure if can last longer than the version shown on ur link but thks for the info :)

i have an additional battery that comes along with LX3, it says 4000mah, which i don't believe.

i think it's better for you to get it through ebay, as with 14$ you can buy two pieces. Do you know whether we can ship it to singapore?
 

Hi,

What is the best COMPACT bounce flash for LX3?
 

Hi

I charged my new original panaspnic battery for 4 hrs for the 1st charge but it didnt last very long. Subsequent charging also did not yield long battery life. Anyone has the same problem?

thanks
 

Hi

I charged my new original panaspnic battery for 4 hrs for the 1st charge but it didnt last very long. Subsequent charging also did not yield long battery life. Anyone has the same problem?

thanks

thought the charger will auto stop charging once battery full? the led on the charger will go off rite? so does leaving the battery on the charger after the led is off will still continue to charge?
 

thought the charger will auto stop charging once battery full? the led on the charger will go off rite? so does leaving the battery on the charger after the led is off will still continue to charge?

Yes normally even when charger indicate if full with either LED On or Off but leaving the battery inside will still charge but the eletrical pulse will be weaker and slower.;)
 

Status
Not open for further replies.
Back
Top