KT Digital Imaging Pte Ltd
- Thread starter Tan SK
- Start date
- Status
I assuem that your monitor is profiled ?. Without it any softproofing has little use ...rao said:I would like to give KT a try.
downloaded the fuji frontier profile from http://www.popphoto.com/article.asp?section_id=2&article_id=480&page_number=1
read http://drycreekphoto.com/Frontier/using_printer_profiles.htm
D70 (SRGB III) -> editting in Nikon capture (SRGB III) and converting from raw to .jpg -> proof-setup in adobe using the profile -> re-adjusted curves and levels -> assign fuji icc profile to photo.
after proof-setup with the "paper white" box ticked, photos are a bit dull-looking. re-adjusted curves and levels.
1) Is there anything wrong with the workflow?
2) Does the downloaded profile closely matches the profile at KT?
KT is a bit far from my place, will be busy this few weeks.. i would like to get things right on my side so that there'll be less headaches and trouble
Secondly Printer profiles are very specific to a lab as well as type of paper used. One cant use a generic profile for every Frontier Lab.
You should ask the lab to provide you their own Printer Profile and then do the softproofing.
All Lab Printers (Frontier/Agfa/Noristu) do not read embedded profiles. Therefor after final corrections, you should use Image->Mode->convert to prifle (printer profile) and then save your image as jpeg. Now it is ready to be sent to the lab.
sanver
hi cs,
we have subscribe to Dry Creek Photo for a colour profile base on our new frontier machine 570. you can download the profile frm Dry Creek Photo
http://www.drycreekphoto.com/Frontier/Profiles/Singapore_frontier_profiles.
pls read the instruction given by them on how to install the profile.
It is important to do a few test print to ensure proper calibration. minor adjustment might require by comparing the printout and display on monitor.
Thanks
we have subscribe to Dry Creek Photo for a colour profile base on our new frontier machine 570. you can download the profile frm Dry Creek Photo
http://www.drycreekphoto.com/Frontier/Profiles/Singapore_frontier_profiles.
pls read the instruction given by them on how to install the profile.
It is important to do a few test print to ensure proper calibration. minor adjustment might require by comparing the printout and display on monitor.
Thanks
Tan SK said:hi cs,
we have subscribe to Dry Creek Photo for a colour profile base on our new frontier machine 570. you can download the profile frm Dry Creek Photo
http://www.drycreekphoto.com/Frontier/Profiles/Singapore_frontier_profiles.
pls read the instruction given by them on how to install the profile.
It is important to do a few test print to ensure proper calibration. minor adjustment might require by comparing the printout and display on monitor.
Thanks
Thanks Zerstorer for providing the correct link.
the correct link should be this:
Btw, the correct link should be this:
http://www.drycreekphoto.com/Fronti...m#SingaporeCity
cheers
Kenji
New Member
Wah, so many great comment for KT Digital. Well, just send the photo for develop today, let's see how's the picture turn out to be. Almost give up searching for it, but then, it's actually opp the block. Near to the right end of it. Will it be possible for the owner to take down a shot of their shop? So when people go, they know exactly where is it located at.
alwayschampion
New Member
There are 2. I think they are his daughters.
alwayschampion
New Member
Huh ? :bigeyes:
Just workers :bsmilie:
Just workers :bsmilie:
- Status
Similar threads
- Locked
