Guys... i think i may be able to smile again
ok... it seems that my method workss but maybe u guys can tell me whether i have damage the shutter and aperature curtain....
1) I use a dish bowl fill with water and mix with detergent/dish washer detergent....
2) i used a cotton swap, dip it into the detergent....
3) **** the camera, set the shutter to 'B', remove the front lens, used the cotton swap with the dipped detergent, swap the shutter curtain gentley... not too wet, then i fire up the shutter release... this way, i get the detergent beneath the folds of the shutter curtain... then release the shutter release.... ofcos, the detergent goes under the area my cotton swap can't reach...
4) i keep on cocking the camera and fire hold the shutter release in 'B' mode to clean them slowly and painfully, neck breakingly pain guys i tell u... my neck almost break from the process... u have to keep on cocking the camera and fire hold the release till all the WD40 + small dirt fibre + some detergent that breaks down the oil... till it is all dry up.... I take a break once in a while and put the camera infront of a fan...
5) after i test fire the shutter in various shutter speed and they no longer stuck!!! but hell i was scare stiff which left me with no choice... i was thinking if i can't get it to work then this piece of vintage will become a showpiece in my living room with it's antique big flash fire buld... this way or the other i got little much to loose... so better die trying then giving up right?
then that's not the end... remember there is still the aperature curtain.... hell... i do it the same way but this time round, the aperature curtain is more easy because they are smaller and more firm and still compare to the shutter curtain.... hell that was intense...
Can anyone here tell me my way of cleaning mention above will it hurt the curtain? the shutter speed mechanism? i check inside the cam under a strong light but see no leak coming thru the shutter & aperature curtain...
------------
But guys... now i'm beging to worry about the shutter speed accuracy... the slower shutter seems alright but i guess i must find a way to time or see whether the faster shutter speed timing is out.
sorry guys this seem to be my longest post...