Right.. After trying to get a cheap IR remote being impossible..
I turned to my PDA.. all those that I found on the net are really ugly...
So I decided to do one up myself.
It's only for those with a PDA or PPC or equivilant. If you have an IR device on your pc, can run find some software to run this ccf file and you can control your camera from your computer too.
*note:
Only to emulate the Canon RC1 remote for 350d/300d etc and the Nikon ML3 for D70/s etc.
I only use these 2 cameras/remotes frequently.
Currently, only the RC1 tested and working like a charm. ML3 should be good too, but currently i don't have a D70s to test.
Steps:
First, get the software:
http://www.pdawin.com/tvremote.html
=> er.. look for help files if necessary
Next:
get my file here
Load it up, and you're ready to go..
here's a few screencaps from my pda.
I turned to my PDA.. all those that I found on the net are really ugly...
So I decided to do one up myself.
It's only for those with a PDA or PPC or equivilant. If you have an IR device on your pc, can run find some software to run this ccf file and you can control your camera from your computer too.
*note:
Only to emulate the Canon RC1 remote for 350d/300d etc and the Nikon ML3 for D70/s etc.
I only use these 2 cameras/remotes frequently.
Currently, only the RC1 tested and working like a charm. ML3 should be good too, but currently i don't have a D70s to test.
Steps:
First, get the software:
http://www.pdawin.com/tvremote.html
=> er.. look for help files if necessary
Next:
get my file here
Load it up, and you're ready to go..
here's a few screencaps from my pda.