**CONFIRM ORDER!- JENIS JND70S Battery pack **
- Thread starter satan_18349
- Start date
- Status
satan_18349
Deregistered
benleez said:
Hi, actually my supplier is waiting for quotations for some of the accessories too...
satan_18349
Deregistered
*Please pass the word around.
satan_18349
Deregistered
HAAA.....paisay paisay...in a rush...doing this thingy...
Witness
Senior Member
ok...to share my exp with it hor.. some stuff i found useful
1) since its a one shot and fire thing...make sure u use full use of the 5 area focus zones...helps in composition alot..
2) to switch from remote to the normal quickly...juz off and on the cam... it will automatically reset..
3) once u switch to remote...do not af with the normal shutter button anymore..it will sometimes cause ya verticle shutter to not work...dunno y...
4) in normal shutter mode...have to half press then can change focus zones if i not mistaken...buten once at remote... press the focus zone button and it will change anytime
5) case of the tape not being too good.... i used a 3m double sided tape..those thick kind with the white stuff in between...tt's real strong...of coz i did cut a hole in the centre for the ir....
overall....
dun use it if u are shooting events.. u dun have the time to change hahaha....
but i does improve the weight and ergonomics of the cam...
cheers...
1) since its a one shot and fire thing...make sure u use full use of the 5 area focus zones...helps in composition alot..
2) to switch from remote to the normal quickly...juz off and on the cam... it will automatically reset..
3) once u switch to remote...do not af with the normal shutter button anymore..it will sometimes cause ya verticle shutter to not work...dunno y...
4) in normal shutter mode...have to half press then can change focus zones if i not mistaken...buten once at remote... press the focus zone button and it will change anytime
5) case of the tape not being too good.... i used a 3m double sided tape..those thick kind with the white stuff in between...tt's real strong...of coz i did cut a hole in the centre for the ir....
overall....
dun use it if u are shooting events.. u dun have the time to change hahaha....
but i does improve the weight and ergonomics of the cam...
cheers...
satan_18349
Deregistered
snemeis said:
No problem, thank you too...
Btw for the session later on, in case you can't locate us at the foodcourt,
please call me at 90089830
Hope to see you all, Thank you.
satan_18349
Deregistered
DUE TO HIGH DEMAND, MORE STOCKS ARE IN
Please indicate your names and particulars for Free-Testing before you buy, I will contact you for collection.
Names (Email, Contact, Qty)
1)
2)
3)
4)
5)
Please indicate your names and particulars for Free-Testing before you buy, I will contact you for collection.
Names (Email, Contact, Qty)
1)
2)
3)
4)
5)
satan_18349
Deregistered
MORE STOCKS ARE IN
Please indicate your names and particulars for Free-Testing before you buy, I will contact you for collection.
Names (Email, Contact, Qty)
1)
2)
3)
4)
5)
satan_18349
Deregistered
Dear All,
You can now go to the following two locations to get your hands on the wonderful long-awaited battery pack for Nikon D70/D70s!
--------------------------------------------------------
VENUE (1) (Wed onwards)
Location: SPORTS H3, East Point Mall #05-05 (Simei)
Time : 11am - 8pm
Tel : 67811318
VENUE (2) (Mon - Fri)
Location: ENVIRONMENT BUILDING, Annex Block #05 (Newton)
Time : 7pm - 9 pm
Tel : 90089830
You can now go to the following two locations to get your hands on the wonderful long-awaited battery pack for Nikon D70/D70s!
--------------------------------------------------------
VENUE (1) (Wed onwards)
Location: SPORTS H3, East Point Mall #05-05 (Simei)
Time : 11am - 8pm
Tel : 67811318
VENUE (2) (Mon - Fri)
Location: ENVIRONMENT BUILDING, Annex Block #05 (Newton)
Time : 7pm - 9 pm
Tel : 90089830
satan_18349
Deregistered
upzzz....
- Status
Similar threads
