Where's a good shop to do your digital printouts?

[tamade]

Where do you guys normally go for developing your digital shots? Preferably those that will do some value add like touching up a bit, speedy services (collection within 30 - 60 mins) and reasonable prices ($0.20 - $0.25 per piece)?

 

[fWord]

This would probably do better in the consumer's corner. But having done some printouts at one place before, I can testify to the quality of service, printing and also the speed. Prices are very reasonable as well...just mention that you are a CS member and give them your nick.

Check this link:

http://forums.clubsnap.org/showthread.php?t=144837

 

[tamade]

This would probably do better in the consumer's corner. But having done some printouts at one place before, I can testify to the quality of service, printing and also the speed. Prices are very reasonable as well...just mention that you are a CS member and give them your nick.

Check this link:

http://forums.clubsnap.org/showthread.php?t=144837

Thanks for the link. Did think of posting it in consumer section, but thought that's more like buy/sell...

 

[Andy Ang]

Where do you guys normally go for developing your digital shots? Preferably those that will do some value add like touching up a bit, speedy services (collection within 30 - 60 mins) and reasonable prices ($0.20 - $0.25 per piece)?

TripleD at Burlington should fit the bill.

 

[lsisaxon]

Where do you guys normally go for developing your digital shots? Preferably those that will do some value add like touching up a bit, speedy services (collection within 30 - 60 mins) and reasonable prices ($0.20 - $0.25 per piece)?

A bit more expensive but I always go to ColourLab at Adelphi for my prints.

 

[Daniz]

Try Grace Digital Lab at Sunset Way, look for Simon. Very highly recommended. :thumbsup:

http://forums.clubsnap.org/showthread.php?t=213461

 

[Denosha]

Used to do my prints at Grace because it's near my place. But my colours always came out funny and Simon told me i had to adjust the photos on my side but i didn't buy that.

Went to KT Digital Imaging at Hong Lim upon recommendations from a friend. Not only were the prints there cheaper, they came out looking extremely close to what I had on my screen without the need for me to do anything extra to the colours on my photos.

 

[jnet6]

A bit more expensive but I always go to ColourLab at Adelphi for my prints.

no doubt... comes out over 90% same as my monitor.

 

[jnet6]

Used to do my prints at Grace because it's near my place. But my colours always came out funny and Simon told me i had to adjust the photos on my side but i didn't buy that.

Went to KT Digital Imaging at Hong Lim upon recommendations from a friend. Not only were the prints there cheaper, they came out looking extremely close to what I had on my screen without the need for me to do anything extra to the colours on my photos.

That's a good choice too... depends on lab and you who had adjusted the photos.

 

[jnet6]

TripleD at Burlington should fit the bill.

how is the quality like???

 

[Andy Ang]

Good. Especially I have calibrated my screen to their's printer.
Rendering is close as I don't ask them to enhance for me.

They do pretty good enhancements anyway, but I just like WYSIWYG.

I do go to colourlabs for slides developing though.

 

[jnet6]

Good. Especially I have calibrated my screen to their's printer.
Rendering is close as I don't ask them to enhance for me.

They do pretty good enhancements anyway, but I just like WYSIWYG.

I do go to colourlabs for slides developing though.

must dig out some pics to try out.

 

[simon tan]

Used to do my prints at Grace because it's near my place. But my colours always came out funny and Simon told me i had to adjust the photos on my side but i didn't buy that.

Went to KT Digital Imaging at Hong Lim upon recommendations from a friend. Not only were the prints there cheaper, they came out looking extremely close to what I had on my screen without the need for me to do anything extra to the colours on my photos.

Hi Denosha,

When i forward your thread to Fuji engineer. They explain that if i use auto-color correction mode, color might change a bit but the picture will be more contrast. You will get original color if the mode is off but a little soft if direct from camera.

I might have use the mode and that is why the problem arise.

I want to thank you for bringing this out or else we wouldn't improve our service.

Best Regards

simon

GOD BLESS

 

[hASHbrown_kopitiam]

Thanks guys for informing us on the places to go to.

Think i'm just unlucky. Try not to go a corner shop at Midlink plaza. V obvious from the entrance.... But u can go there for Cheap 8r prints. $1.50 only...(for more prints) Unbelievable. Other shops do round $3.

The quality is not there...colour is abit off... :thumbsd: If u wan cheap :thumbsup: but not superb quality..can go there lor...

 

[Andy Ang]

Depends on the paper they use also.

 

[tamade]

Cool, thank you all for sharing!

 

[simon tan]

Hi C'sers

Forget to mention one important point and that is the "PRINTING QUALITY GUARATEE" policy.

You can get Free re-print for photos which you are not completely satisfied for whatever reasons.

Cheers!

simon

GRACE DIGITAL LAB

 

[Andy Ang]

Haha, Grace is advertising directly now.

 

[simon tan]

Haha, Grace is advertising directly now.

Hi Andy,

Just to show my sincerity!

Cheers!

simon

 

[Andy Ang]

No Worries, Grace is quite good too.
Only that it is a bit too far for me.