Need advise on dry cabinet

[Snoweagle]

hmmm, i am using a 30l, also having problem with my dry-cab.
i turn the knob towards A leh, ard 1011 oclock direction, still getting less than 40%, any advise??

all my equipment inside leh, ask a few frens, they say put in ur item then adjust? is it correct?

Yrs ain't so bad. I'm experiencing 20+%.

 

[ExplorerZ]

hmmm, i am using a 30l, also having problem with my dry-cab.
i turn the knob towards A leh, ard 1011 oclock direction, still getting less than 40%, any advise??

all my equipment inside leh, ask a few frens, they say put in ur item then adjust? is it correct?

try 9 o'clock... should be alright, mine stablised at around 50 @ 9 while 40+ @ 10-11 o'clock.

 

[eagletay]

Yrs ain't so bad. I'm experiencing 20+%.

Yeah...follow ExplorerZ's settings.
Mine setting is similar to ExplorerZ and attain same humidility level...

IMO, regardless of AD or HD series, the unit will on at the time.

 

[Artosoft]

OIC.... what is the humidlitiy level now in your cabinet? At which pos?

Mine is @ 10 'o clock (close to Pos A), 43%.

Mine is around 9 o'clock. Most of time it is 45%RH, temperature 29degreeC. Digi-cabi AD-040.

Regards,
Arto.

 

[rexlim]

Mine:-
Digi-Cabi HD-100 analog:
Set at below 9 o'clock position (abt 8.45): RH abt 48%
Quite standard as some fellow CS'ers... :thumbsup:

 

[Snoweagle]

Yeah...follow ExplorerZ's settings.
Mine setting is similar to ExplorerZ and attain same humidility level...

IMO, regardless of AD or HD series, the unit will on at the time.

My AD-060 is using HD series' dehumidifying unit, even at 9 o'clock position still drop...maybe absorbing too fast.

 

[Snoweagle]

Mine:-
Digi-Cabi HD-100 analog:
Set at below 9 o'clock position (abt 8.45): RH abt 48%
Quite standard as some fellow CS'ers... :thumbsup:

Mine same...but today came home...was 30%.

 

[rexlim]

Mine same...but today came home...was 30%.

:bigeyes: Soooo powerful ah!! :bigeyes:
Then u shd do minor adjustments till u get ur desired RH.
Do allow it to stabilise for a day b4 re-adjusting again...

 

[photographique]

There's also something called 'dry stick'...a heat generating stick that you can put inside you normal container or what so ever.

Cheap alternative to a dry cabinet.

 

[Snoweagle]

:bigeyes: Soooo powerful ah!! :bigeyes:
Then u shd do minor adjustments till u get ur desired RH.
Do allow it to stabilise for a day b4 re-adjusting again...

It's been like this for around 2 weeks liao haha...

 

[Artosoft]

It's been like this for around 2 weeks liao haha...

So you can do a trick by powering off the dry-cab for few hours, to save power and maintain humidity around 40-50%RH .

Put timer switch is better.

Regards,
Arto.

 

[Snoweagle]

So you can do a trick by powering off the dry-cab for few hours, to save power and maintain humidity around 40-50%RH .

Put timer switch is better.

Regards,
Arto.

Hmmmm...But my AD-060's power supply is also shared by my other things such as my computer.

 

[eagletay]

Mine same...but today came home...was 30%.

I think u better call digihub and inform them....IMO if possible, 'insist' for 1 to 1 exchange since u bought less than a week and yours claimed to latest 'model' (if I remember)....

Change to existing type with red and green LEDs...at least it is consistent for my AD-60...

 

[Snoweagle]

I think u better call digihub and inform them....IMO if possible, 'insist' for 1 to 1 exchange since u bought less than a week and yours claimed to latest 'model' (if I remember)....

Change to existing type with red and green LEDs...at least it is consistent for my AD-60...

Mine's the one which also comes with the HD Analog series and this is auto cut off once RH value has been reached, but dunno y took so long to reach. Maybe i always open and close the cabinet door haha...

 

[Artosoft]

Mine's the one which also comes with the HD Analog series and this is auto cut off once RH value has been reached, but dunno y took so long to reach. Maybe i always open and close the cabinet door haha...

Are you sure there is an auto cut off once the RH inside reach certain level? That's feature is distinguish between pro and non-pro model. Non-pro model (cheaper one) doesn't have that feature. Are you reading that from the manual? Or just hear from the seller?

Regards,
Arto.

 

[Artosoft]

Hmmmm...But my AD-060's power supply is also shared by my other things such as my computer.

There is always a way to extend or get more power outlet from single outlet. You can use power strip or splitter 1-2, 1-3 .

Regards,
Arto.

 

[Snoweagle]

Are you sure there is an auto cut off once the RH inside reach certain level? That's feature is distinguish between pro and non-pro model. Non-pro model (cheaper one) doesn't have that feature. Are you reading that from the manual? Or just hear from the seller?

Regards,
Arto.

I heard it directly from Digihub. The one with red n green LEDs are older.

 

[AxeLa]

I heard it directly from Digihub. The one with red n green LEDs are older.

Wah...mine old model...sianz...:cry:

 

[Snoweagle]

Wah...mine old model...sianz...:cry:

That's what i heard from Digihub, but they both serve the same purpose except with different concepts.

 

[AxeLa]

That's what i heard from Digihub, but they both serve the same purpose except with different concepts.

Boh pian lor.....