don't tell me you bought the d60 without understanding that it doesn't AF with AF-D lens?
the lack of AF motor is not really a problem for me since it can be solve by AF-S and sigma HSM lens but the 3 AF points is a bit limiting in low light conditions...
don't tell me you bought the d60 without understanding that it doesn't AF with AF-D lens?
the lack of AF motor is not really a problem for me since it can be solve by AF-S and sigma HSM lens but the 3 AF points is a bit limiting in low light conditions...
on the topic of hi iso, 1600 on d60 is usable if properly exposed.
Why i cant use AF 50mm f1.8D?And have to use AFS 50mm f1.4G? AFS very X![]()
Ya, i hear from some bros that, the ISO i needed is only to 800.
Ya, i hear from some bros that, the ISO i needed is only to 800.
Why i cant use AF 50mm f1.8D?And have to use AFS 50mm f1.4G? AFS very X![]()
With 150mm you'll need 1/150s according to the rule of thumb. Remember you'll also need to include the crop factor. So if you zoom to 50mm and you're using DX camera (which D60 is), you'll need to use 1/(50*1.5) = 1/75s. Similarly for 150mm, it should be 1/225s or faster. Try to shoot with P mode first, which will ensure your flash sync speed to be between 1/60-1/200s, and let the camera select the aperture. Shooting in A mode will be more complicated as you now need to take note of the relationship between aperture, sensitivity and flash range (page 179 of your D60 manual).
I do NOT concur with the need to include the 'DX' factor in this rule of thumb. The DX thing is a change of effective angle of view and not a change of focal length - which is the main para. that affect the 'mag' factor and hence the 'shake' tendency.
I do NOT concur with the need to include the 'DX' factor in this rule of thumb. The DX thing is a change of effective angle of view and not a change of focal length - which is the main para. that affect the 'mag' factor and hence the 'shake' tendency.
So let's say I use an FX camera at 50mm to take a pic of a black ball. When I printed it on 4R size paper, the ball is 1cm in diameter. Now if I use a DX camera at same focal length to take the same ball at exactly the same distance, and then printed it on 4R paper. Will the ball be the smaller, same size, or larger?![]()
Yes I know he is talking about 1/focal length rule of thumb. So my question still remains as above, will the ball printed on the 4R size paper for the DX be smaller, same size, or larger, given the same condition? The reason I asked is because now we need to discussed about magnification.![]()