Dry Cabinet : DigiCabi or AmPro ??
- Thread starter ekardo
- Start date
- Status
Am Pro may not be a good buy in terms of warranty. A friend bought a unit 2 years back recently when the unit developed problems tried to get in touch with Alley Photo but they shut down, tried to call the company as stated in the warranty card could not get them. Ultimately we found that the company backing the warranty had also closed down and found the "new" distributors whom I suspect are the same group of people who ran the origianal distributors - otherwise it very strange that a new distributor know which model that was. Now legally since these are 2 separate companies - the new distributors does not need to honour the warranty - repairs cost $80+ and the MF'er wanted the spoilt drying unit to be handed in or the cost of repair would be $100+++
It's like get robbed after being raped. I strongly suggest that the buyers of AM Pro brand be aware that the warranty for 5 years may not be for valid for 5 years.
Value Plus as sold thru Tangs is a brand that can be trusted - local built with a company that honours their obligations. They have the serial numbers of units produced in a data based with date of mfg and can apporximate when it was sold. Lossing your warranty card does not mean you lose your warranty.
A small surprise I discovered when a unit I bought from them had some problems and the warranty card was lost.
It's like get robbed after being raped. I strongly suggest that the buyers of AM Pro brand be aware that the warranty for 5 years may not be for valid for 5 years.
Value Plus as sold thru Tangs is a brand that can be trusted - local built with a company that honours their obligations. They have the serial numbers of units produced in a data based with date of mfg and can apporximate when it was sold. Lossing your warranty card does not mean you lose your warranty.
A small surprise I discovered when a unit I bought from them had some problems and the warranty card was lost.
silver.wolf
Senior Member
metals99 said:
i'm wanna get one also. but not sure how bulky is it. may need a vehicle. better check if there's stock for 3 persons. hahaa...
silver.wolf said:
Well guys i had just gone to alan photo sorry ekardo but i saw that they have 3 stock left.. and i took one and one is reserved..
The salesman tried to "ketok" me 80 bucks haha and do remember to bargain 70!!! and remember to say inclusive GST k now 5 % haha..
Well now i got it i dunnow how to get my warranty so i just need to e-mail them and digihub i got a product from them no warranty??
please help me thanks!!!
what I did is I gave them a call and explained the situation that I don't get the warranty card while doing purchasing from AP, and they asked me to email them the mailing address and they will mail it out to me.
For your case, I think an email with mailing address and what you want should do the job.
For your case, I think an email with mailing address and what you want should do the job.
skyjuice said:what I did is I gave them a call and explained the situation that I don't get the warranty card while doing purchasing from AP, and they asked me to email them the mailing address and they will mail it out to me.
For your case, I think an email with mailing address and what you want should do the job.
yeah thats what i have done!!
silver.wolf
Senior Member
metals99 said:
so is the digicabi bulky and heavy? u hand carry?
ekardo
Senior Member
aiya...u bought already ??
I just bought a S7000...now very poor...
but should be getting it soon...but should be taking train..from Little India back to Hougang...
but weather rather bad nowadays..think I shall wait for just a while longer..need to make space in my room too.
I just bought a S7000...now very poor...
but should be getting it soon...but should be taking train..from Little India back to Hougang...
but weather rather bad nowadays..think I shall wait for just a while longer..need to make space in my room too.
for those using digi hub DB-036
i would wanna inquire that i touch the back place inside the cabinet of the dehudifier inside.. and found moisture inside.. is it suppose to be like that??
its only at the motor place.. anyway the hygrometer is at 47 % only when i let it dry and ofcourse when i open would sure increase..
by the way.. the way to calibrate the humidity.. u all is trial and error is it and keep trying to maintain atleast 48 %? i think thats best or only 45 %
thanks.. anyway digi hub still have not send me the warranty card maybe cause of the holidays..
i would wanna inquire that i touch the back place inside the cabinet of the dehudifier inside.. and found moisture inside.. is it suppose to be like that??
its only at the motor place.. anyway the hygrometer is at 47 % only when i let it dry and ofcourse when i open would sure increase..
by the way.. the way to calibrate the humidity.. u all is trial and error is it and keep trying to maintain atleast 48 %? i think thats best or only 45 %
thanks.. anyway digi hub still have not send me the warranty card maybe cause of the holidays..
silver.wolf
Senior Member
i just got my digicabi over the weekend for $70 at AP. Their stock is in, saw many pieces there.
nikefreekz
New Member
it's selling at $118 at AP for the DB-036...
sgfreestyler
Senior Member
carrefour oso selling at $118 ... those with everyday card .. will have 5% rebate .. hee
nikefreekz
New Member
was abit confused how come the guys can get it at $70 but in 04 and now it's $118....
Called Alan of Digicab...the price gone up since mid of this year
anyway, i got mine already. there is a warranty card issud by Digicab within the box. Period = 5 yrs.
nikefreekz
New Member
how much did you get it for?
- Status
Similar threads
