ZerocoolAstra
Senior Member
Probably iPhoto or SLR-R or maybe even OP.
D90 User Group (Thread IV)
- Thread starter cheesy
- Start date
- Status
Hi all, I'm also a D90 user. In fact, it is my first DSLR, aside from a couple of PNS cameras during the mega-pixel race. I was patient to wait out by resorting to shooting digital photos using PNS and earlier on, film on Nikon F70 and F4. I'm pleased that my old lenses ie Tokina Pro AF 28-70mm F2.8, Nikkor AF 50mm F1.8 and AIs 105mm F1.8 are still usable on the D90. I still have an old speedlight in the form of SB-200. I wonder if the latter is still relevant given that the build-in flash of D90 is sufficient for general shooting conditions. I have a question though. I still have Marumi 77mm UV and CPL (gotta check if its linear or circular) filters from the film era (19 years old, actually). Do you suggest I use them or buy the current "digital" ones?
footnote: In those days, these lenses were made in Japan, even the caps!
footnote: In those days, these lenses were made in Japan, even the caps!
Last edited:
ZerocoolAstra
Senior Member
CPL = circular polarizer.
If it's not circular, it will affect your metering values.
So even if it's not a CPL, you still can shoot based on calculation (like what we do with large-stop NDs).
UV filters have changed little in the past few decades. Probably coating technology has improved, but the concept is still the same. Since digital sensors are not sensitive to UV light, these filters mainly serve as a 'security blanket' for the front element.
We use external flashes for a larger light source (possibility for softer light) and also to create distance between flash and lens. If you use an ultra-wide angle lens, the pop-up cannot illuminate the front, coz the light would be blocked by the lens itself.
Thanks for your reply, ZA. I just recalled the contrast filter is labelled as PL on the box. Based on your reply, I don't see the need to replace filters then. The reason I asked is because I have lenses in 52mm, 62mm, 67mm (kit lens 18-107mm) and 77mm with their own filters. Rojak man. If replacement is needed, I will have to consider step up rings to 77mm for some of these lenses. Finally, do you recommend an upgrade to SB-800/900?
Last edited:
ZerocoolAstra
Senior Member
if you're the type that likes to have UV filters on every lens as a protection, then just buy to fit the lens thread diameter.
Usually step-up rings are used for more expensive filters (eg. ND), where you use only occasionally and wish to keep a set of same diameter filters.
Usually step-up rings are used for more expensive filters (eg. ND), where you use only occasionally and wish to keep a set of same diameter filters.
pasay
New Member
to add on to ZCA's recommendations, for digital sensors, UV filters act as clear filters for protection from physical damage rather than UV rays. the 50mmf1.8's front element is recessed deep enough that the barrel itself acts like a protective hood, so you can skip the UV filter altogether, but that's a matter of personal preference. 
sb200 is a small flash, not too powerful (GN is only 33 i think) you may want to upgrade to the sb900, or the newer sb700 speedlights to maximize your strobing.
sb200 is a small flash, not too powerful (GN is only 33 i think) you may want to upgrade to the sb900, or the newer sb700 speedlights to maximize your strobing.
Can share me the link to the Nikon firmware update? I tried to find it here:
http://support.nikonusa.com/app/answers/detail/a_id/13783
and didn't find anything for D90.
ZerocoolAstra
Senior Member
seems like it was removed... I can't find it as well. Maybe there were bugs?
This question was raised on this very thread not too long ago... I remember someone asking about it as well... but I can't seem to find the post. Went back up to 8 or 9 pages still can't find. I must be getting blind
Nikihunter
Member
I believe this is the link you are looking for:
http://www.imaging-resource.com/NEWS/1289508170.html
http://nikonimglib.com/dcdata/#os-windows
i updated the new firmware, i don't see any difference or use of it. because d90, you need to manually select the picture and edit with distortion.. i can do it using PTlens or PP.
http://www.imaging-resource.com/NEWS/1289508170.html
http://nikonimglib.com/dcdata/#os-windows
i updated the new firmware, i don't see any difference or use of it. because d90, you need to manually select the picture and edit with distortion.. i can do it using PTlens or PP.
coolthought
Senior Member
hmmm... I always thought how bad or less a distortion has only to do with the lens. Quite a surprise. I will go read up more about it. Thanks.
Thanks for the link.
Last edited:
ZerocoolAstra
Senior Member
tks for the link!
So after applying the firmware update, you have to manually select imges that you want the camera to auto-correct? aiyoh... difficult. Might as well do it on PC.
kriegsketten
New Member
tks for the link!
So after applying the firmware update, you have to manually select imges that you want the camera to auto-correct? aiyoh... difficult. Might as well do it on PC.
I haven't tried this feature... maybe I'll try it with my 10-24 (10mm gets the most distortion).
The problem isn't the hassle whether doing it on-body or PC... it's more likely that they will convert it to JPEG instead of giving you back the usual NEF? Or am I wrong on this?
ZerocoolAstra
Senior Member
yes... logically thinking, if they apply some correction to the file, the output should be JPG.
kriegsketten
New Member
Then no point already, especially if you need to do PP first before distortion correction (which I'll always leave to last final steps)...
ZerocoolAstra
Senior Member
yeah lor... which is why there wasn't a collective "hallelujah!!!! the Saviour has come!!!" chorus when this firmware update was released :bsmilie:
Nikihunter
Member
I find D3100 has "Auto distortion control" under the "shooting menu". This means it adds auto distortion and then stores which could be useful for this model because no need to do it manually. i'm not sure about other models such as d5000.
In D90 this is available only under "retouch menu". i took raw image and applied "distortion auto", it was saved as jpeg.
In D90 this is available only under "retouch menu". i took raw image and applied "distortion auto", it was saved as jpeg.
ZerocoolAstra
Senior Member
It's all about the targeted buyer. D90 perhaps meant for the more "enthusiast" buyer who prefers to have more control over the output. That's why you don't see "guide mode" and other "frivolous" stuff
pasay
New Member
I find D3100 has "Auto distortion control" under the "shooting menu". This means it adds auto distortion and then stores which could be useful for this model because no need to do it manually. i'm not sure about other models such as d5000.
In D90 this is available only under "retouch menu". i took raw image and applied "distortion auto", it was saved as jpeg.
are you saying that on the d3100, it adds auto distortion control even if you shoot raw, as opposed to the d90 where you shoot raw then have to manually do correction after the fact and get a jpeg output?
Last edited:
Irvine
Senior Member
I find D3100 has "Auto distortion control" under the "shooting menu". This means it adds auto distortion and then stores which could be useful for this model because no need to do it manually. i'm not sure about other models such as d5000.
In D90 this is available only under "retouch menu". i took raw image and applied "distortion auto", it was saved as jpeg.
d5000 does have auto distortion control.
- Status
Similar threads
