Canon 7d picture is soft?


Status
Not open for further replies.
Sorry guys my subject is sleeping, will post tomorrow morning.
Unless you want me to take arbitrary object picture?
 

Mine looked soft initially. However, after following the tips on how to use micro-adjustment, i set my 7D to -10 for all lenses and all subsequent photos came out sharp already.

Thanks for the tip !

Also updated my 7D's firmware to Ver 1.1.0 as mine was initially 1.0.7
 

Last edited:
-10 does not sound right. Its way too much correction. Are you sure the same -10 settings works for ALL your lenses? Maybe you wanna get CSC to recalibrate your body.



Mine looked soft initially. However, after following the tips on how to use micro-adjustment, i set my 7D to -10 for all lenses and all subsequent photos came out sharp already.

Thanks for the tip !

Also updated my 7D's firmware to Ver 1.1.0 as mine was initially 1.0.7
 

OT a bit, is there any guide to use the micro adjustment?
 

Mine looked soft initially. However, after following the tips on how to use micro-adjustment, i set my 7D to -10 for all lenses and all subsequent photos came out sharp already.

Thanks for the tip !

Also updated my 7D's firmware to Ver 1.1.0 as mine was initially 1.0.7
Is it possible if you can post picture after you change setting to -10?
We would like to see how much sharpness you got after changing that setting.
 

sorry, don't have the original one in this pc. got it back from FB so not very clear:

1.jpg


taken with tamron 17-50 F/2.8

So any comment? Or just user's issue?? :P

how much sharp is 'sharp' according to you?
I am seeing your picture is ok.
better to send the original file, because the FB pic is normally softer.
 

how much sharp is 'sharp' according to you?
I am seeing your picture is ok.
better to send the original file, because the FB pic is normally softer.

it is something like what commonjunks posted... and I also don't have the originial file here...
 

Here a quick picture taken today morning.
This picture is cropped and re-sized, default sharpness (3).
picture taken with 50mm f1.8 with following settings f3.2, 1/125, ISO 200, flash (no natural light in room).
Flash is a bit harsh.

7d77cda5-d24b-4fcb-94e1-1b49028f6b5f_o.jpg
 

it is something like what commonjunks posted... and I also don't have the originial file here...
Just to let you know i was using f/1.8 which give you very thin DOF.
If you want sharper picture for your subject as per your attachment you need to pump f up.
I have sharper images with Tamy 90mm but again Tamy cost me 800$ (that time) and 50mm only 120$. I have already sold Tamy so cannot give you a comparison. But frankly if you want others to really give you a constructive advise you should provide information about your picture and lens you used to take that picture.
 

Hi

Thanks for the latest pic... still looks sharp. My initial thought is that the pic would be soft if the focus setting is 19 points AF rather than Spot AF. Looks like I am mistaken :embrass:. Thanks once again for the posting the picture..
 

Status
Not open for further replies.
Back
Top