Share some MF photos .... part 3

[neoro]

Hasselblad 500c - 80mm C T* Planar Chrome - Kodak Tri-X 400 in TMax Dev 6:30mins 20 degrees

First roll through my Hasselblad, still prefer the ergonomics of my Mamiya RZ67.

Slightly under developed on the left side, probably due to not enough developer or did not rinse properly.

Enjoy

Graceful!!

 

[The Dry Box]

Great shot and details, I have the same problem with my Paterson reels as well

I wonder have any of you tried this?
http://www.youtube.com/watch?v=6cD8eP8kjdo

I don't do much mf till recently, but I haven't encounter any problem with loading 120 film so far with this method.

 

[dankwan]

I wonder have any of you tried this?
http://www.youtube.com/watch?v=6cD8eP8kjdo

I don't do much mf till recently, but I haven't encounter any problem with loading 120 film so far with this method.

bought the AP one from Chiif, no more problems! more results from my experiments

HC 110G @28C Shanghai GP100 (120) in my brand new AP tank (Yay no more loading issues) pre-soak 5mins, stand at 30mins, no agitation whatsoever, water stop bath, fix, wash and dry. Finding grain more under control, excellent sharpness, could do with a bit more contrast and still blocked highlights but not too bad....next set 45mins later this week...

 

[dankwan]

I am gobsmacked by the images this Chinese Seagull TLR can produce. The tessar copy is nothing to be scoffed at. Shot on Reala 100.

so am I!!:thumbsup::thumbsup:

 

[merelyok]

so am I!!:thumbsup::thumbsup:

Thanks Dankwan!

A few more.

Mamiya 7
Tri-X
D76 1+1

 

[mmmel]

Tri-X / HC-110B

 

[pixelbrain]

Tri-X / HC-110B

fantastic tones!!.. May I know if you scan the negs yourself?
Can't seem to scan tri-x properly on my epson v700.. looks washed out and lacking in contrast detail.. i scan using the supplied epson scanning sw, 16bit greyscale at 2400dpi with no other adjustments, on the supplied film holders.

 

[mmmel]

yes, i scan them using the canon 8800f with the supplied software.

here's 2 more:

fantastic tones!!.. May I know if you scan the negs yourself?
Can't seem to scan tri-x properly on my epson v700.. looks washed out and lacking in contrast detail.. i scan using the supplied epson scanning sw, 16bit greyscale at 2400dpi with no other adjustments, on the supplied film holders.

 

[chiif]

Your R32? You have a great taste for cars...

 

[merelyok]

Your R32? You have a great taste for cars...

Family car Chiif....

 

[merelyok]

Some night time shots.

Hasseblad 503CX
80mm CF Planar T*
Tri-X pushed to 1600
D76 1:1

 

[Nasty204]

Some night time shots.

Hasseblad 503CX
80mm CF Planar T*
Tri-X pushed to 1600
D76 1:1

Nice mood and composition.

 

[raytoei]

Yesterday at clark quay

Rotated for alignment, resized.

Cropped and resized.

Adjusted for Contrast and Brightness.

 

[dankwan]

Yashica Mat124G with Lucky 100 - HC110 dilution G @ 29C, pre-wash @5mins, initial agitation 10sec, stand development at 30 mins, no agitation in-between , fix, wash and dry

 

[tan131]

A few test shots from my very first MF roll.

 

[ZoomP]

A few test shots from my very first MF roll.

Congrats bro!!! Nice n sharp!!! Will see if I got time to develop at Konota tom

 

[dankwan]

more chemistry experiments (room temp)

Yashica Mat124G with TriX - HC110 dilution G @ 29C, pre-wash @5mins, initial agitation 10sec, stand development at 60 mins, no agitation in-between , fix, wash and dry - good grain control, good sharpness, nice even development (no splotches like china made film), good midtones and very good highlight control. Initial agitation seems to have helped contrast and grain control (smaller grain than pure stand), would like more tonal range in darks and shadows though...

 

[Nasty204]

First few shots on my first roll on the Hassy.

Had difficulty focusing on the WLF, need to get used to it.

Forced cropping as my scanner does not support MF films :-(

 

[Nasty204]

This is from the Pentax 645.

Forced cropping as my scanner does not support MF films :-(

Good excuse to get the EPSON V700

 

[dankwan]

First few shots on my first roll on the Hassy.

Had difficulty focusing on the WLF, need to get used to it.

Forced cropping as my scanner does not support MF films :-(

welcome to MF brother noel.....herein starts the road to LF :bsmilie: