Post your 'Before' & 'After' Post Processing pictures

[HVB88]

My turn...

This was taken few years back. Lucky took the photo using RAW.
Post processing wise, I increase the exposure and make use of the gradient tools.

 

[hydroburn249]

My turn...

This was taken few years back. Lucky took the photo using RAW.
Post processing wise, I increase the exposure and make use of the gradient tools.

wah this one. from nothing into something. power.

 

[loneWolff]

Photograph provided by GrBenji, composition was off as it was a test shot.
Objective: To remove the magenta cast created by the Hitech 4-stop GND filter.

Note that the reflection of the machine is created using a yellow gradient fill and masking which is a wrong decision.

 

[XavierShoot]

I love what you did to the ground. It looks so old, nice.

thank you~ delinquent
some guide over at => http://www.photoshopessentials.com/

 

[HVB88]

wah this one. from nothing into something. power.

Thank you hydroburn249.

 

[Shahrie]

Hey guys. Don't mind the model's 'chopped' hand. I'm just doing this for fun.

 

[sinned79]

Hey guys. Don't mind the model's 'chopped' hand. I'm just doing this for fun.

this is just b/w conversion... i dun see u playing with the tonality in the photo when converted to b/w, i believe everyone can also do this

 

[wmayeo]

Tried my best to adjust the perspective & colors, not easy task. :sweat:
To Experts/Seniors, kindly comment the pp. Thanks!


Before

After

 

[SamTac]

A beginner trying out on PP.

Before...

After...

 

[wmayeo]

Before

After

 

[Shahrie]

this is just b/w conversion... i dun see u playing with the tonality in the photo when converted to b/w, i believe everyone can also do this

Definitely it can be just a simple B&W conversion and anyone can do it. But what I did was to improve the contrast and 'depth' of the clouds from the models. Both background and model are adjusted differently. As you can see the 1st pic is very flat and in the wrong WB. To directly convert to B&W, the model's skin would be darker, less details in the clouds and the foreground will be just flat. I know B&W is very subjective and hard to master. I'm still learning.

To enhance this in colour, well .. I just don't like the end result thts why I decided to do a b&w for this. (I can't find the emoticon icon!!)

 

[zaren]

Definitely it can be just a simple B&W conversion and anyone can do it. But what I did was to improve the contrast and 'depth' of the clouds from the models. Both background and model are adjusted differently. As you can see the 1st pic is very flat and in the wrong WB. To directly convert to B&W, the model's skin would be darker, less details in the clouds and the foreground will be just flat. I know B&W is very subjective and hard to master. I'm still learning.

To enhance this in colour, well .. I just don't like the end result thts why I decided to do a b&w for this. (I can't find the emoticon icon!!)

hope you don't mind if i use your photo to try colour enhancement....

before

after

 

[fishtan]

I have recently DL ACDSee and was playing with it, this is what I get, any comments -ve or +ve are all welcome

Before

After

 

[alf6901]

join in the fun with my limited pp knowledge

before

after

does the after pp give you a eerie feel?

 

[jiaxuan90]

Well though not much but let me share mine as well.

Before:

After:

mabmy, care to share how u did it??

 

[NikD90]

Newbie here.. Please C&C
Before

After

 

[Shahrie]

hope you don't mind if i use your photo to try colour enhancement....

before

after

Hey bro. I don't mind at all. Its sharing session. Your DI not bad! Did you use curves or blending modes?

 

[zaren]

Hey bro. I don't mind at all. Its sharing session. Your DI not bad! Did you use curves or blending modes?

hi, i used photoscape.... backlight, contrast enhancement and saturation curves.

 

[Thakur limbu]

Like it or not, I think post processing is very important to make the picture look nicer. However, it is not just about how to use the tools in the software, but also ideas in presenting the mode you want it to be. Like many other newbies, I know how to use some of the basic tools in photoshop but I hope to learn more. I think it’ll be good to learn from the experts here & get to see the pictures ‘before’ & ‘after’ the PP (Although some only believed in showing the best). Anyone willing to share? To kick start, I will post the 1st picture & hope to see more…

Before:

After:

Your "after"in not bad of course but bro in my view u should make the boat is floating on the water, it seems the boat is above some kind of plain surface,it's ok u removed the dirts but your background needs some watery effect such as waves, the splashes.

 

[Thakur limbu]

Newbie here.. Please C&C
Before

After

Bro I hope u won't mind,did you forget to enhance teeth or u wanted it to be natural?