Moonlightsg said:It is because like K-x, you have to set the correct type of battery setting....
Lithium is 1.5v, will go 1.4v if the batt going to use up...
recharge NIMH is only 1.2v, will go 1.1v if the batt going to use up...
if you set "Lithium" and put in "NIMH" it will show red bar very fast.... because Camera expecting 1.5v but you feeding it 1.2v... so will think that the batt going dead soon
if you set "NIMH" and put in "Lithium" it will show green bar all the way until it dead.... because Camera expecting 1.2v but you feeding it 1.5v... so will think that the batt still have a lot of power when it going down to 1.4v, then you will have issue on green bar a sec ago, suddenly cannot even power on the cam...
so if you think that drain battery very fast but actually the battery is still well-usable in other electronics device, i think you are belongs to set "Lithium" and put in "NIMH" case...
anyway, servicing is done by the local distributor.
Contact Us
From the website of the local distributor:
For service and repair enquiries of your electronic equipment, contact the Emjay Customer Care department:
Emjay Care Centre
111, North Bridge Road
#14-01, Peninsula Plaza
Singapore 179098
Telephone:+ 65 6338 8948
Fax: +65 6338 4709
Email: service@eepl.biz
Operating Hours: Monday to Fridays; 11.00 AM to 6.30PM
Close on Saturdays, Sundays and Public Holidays
.
MAy i find out .
If I already bought the extended 1 year warranty.
can I buy another year of warranty at the end of the extended 1yr warranty?
That means that
I will have a total of 3yrs warranty.
Wahhhhh cheem sia haha moonlight what eneloop u using ah? Got 1 person quotin me for eneloops liao
Wahhhhh cheem sia haha moonlight what eneloop u using ah? Got 1 person quotin me for eneloops liao