Dear all,
As promised earlier, I will share my DIY solution for the Panasonic 7-14mm Ultra-Wide angle lens.
First, I must really give credit to Brother hyperFocal as his thread inspired me to look for other possible solutions and also to Brother wonglp for sharing some of the links with me so that I can further do my research on the available solution.
Just to share the process...
After getting the Panasonic 7-14mm lens, my first thought is how to maximize the use of my filter sets on this useful lens.
I read up those threads send by wonglp and also the thread by hyperFocal as reference and begin thinking of my solution.
First, I measure the external diameter of the lens.
It measures around 69.6mm.
I tried measuring the largest diameter around the hood of the lens.
It measures around 70mm.
My first thought was to use a step-up ring from 72mm to 77mm and try to secure it. But they I realised that the hole size is smaller than 70mm...
As promised earlier, I will share my DIY solution for the Panasonic 7-14mm Ultra-Wide angle lens.
First, I must really give credit to Brother hyperFocal as his thread inspired me to look for other possible solutions and also to Brother wonglp for sharing some of the links with me so that I can further do my research on the available solution.
Just to share the process...
After getting the Panasonic 7-14mm lens, my first thought is how to maximize the use of my filter sets on this useful lens.
I read up those threads send by wonglp and also the thread by hyperFocal as reference and begin thinking of my solution.
First, I measure the external diameter of the lens.
It measures around 69.6mm.
I tried measuring the largest diameter around the hood of the lens.
It measures around 70mm.
My first thought was to use a step-up ring from 72mm to 77mm and try to secure it. But they I realised that the hole size is smaller than 70mm...