dolcefarniente
New Member
Btw, any current or upcoming promo on X-t10? TIA!
[Newly released] the X-T10 : the daily companion for lifes everyday moments.
- Thread starter nightwolf75
- Start date
Currently on top of all the freebies (grip , batt, etc) an additional good electronic dry cabinet to be collected from Fujifilm studio - whilst stocks last
pnly for the kit iirc, body alone option not entitledCurrently on top of all the freebies (grip , batt, etc) an additional good electronic dry cabinet to be collected from Fujifilm studio - whilst stocks last
dolcefarniente
New Member
Thanx Keith, TRD, No freebie / promotion for just body at all?
If it's body alone , u do still get the free grip, extra batt plus others totaling approx $300
Yes same freebies as kit but just without dry cabinet. Personally I find the approx $500 price difference between body and 18-55 rather high.
Firmware Ver 1.01 for X-T10 is out 
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt10/index.html
The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:
1. Improvement of "EYE DETECTION AF" speed when used with XF90mmF2 R LM WR
"EYE DETECTION AF" speed is improved when used with XF90mmF2 R LM WR in case that "FACE DETECTION" and "EYE DETECTION AF" are ON in "AUTO FOCUS SETTING" of the Shooting Menu.
2. Operational improvement of Fn1 Function button (Default setting : movie shooting)
The shortcut function to Fn1 BUTTON SETTING by pressing the button more than 2 sec. is removed. To avoid accidentally pressing the button when turning the Exposure compensation dial, pressing the button approx. 0.5sec. is required to start the function allocated to the button. This improvement is to avoid unexpected appearance of the SETTING when Fn1 function is needed.
<Note-1>
Functions of Fn2 through Fn7 button remain same.
<Note-2>
Steps to change the setting of Fn1 are same as usual like below.
・Change it in the function(Fn) setting menu appeared by pressing DISP/BACK button for a while.
・Change it through Setup Menu>BUTTON/DIAL SETTING>FUNCTION (Fn) SETTING.
3. Angle difference between jpeg image and jpeg image converted from RAW file
Currently, there is angle difference between jpeg image (including jpeg images converted in a camera) and jpeg image converted from RAW file by RAW FILE CONVERTER EX2.0 etc. The jpeg image angle converted from RAW file is a little bigger.
With this upgrade, the jpeg image angle is matched to one which is converted from RAW file. This symptom happens only when lenses below is used. In case of zoom lenses, this happen in wide-angle side.
　
XC16-50mmF3.5-5.6 OIS, XC16-50mmF3.5-5.6 OIS Ⅱ, XF18-55mmF2.8-4 R LM OIS,
XF10-24mmF4 R OIS, XF16-55mmF2.8 R LM WR, XF18-135mmF3.5-5.6 R LM OIS WR,
XF18mmF2 R and XF27mmF2.8
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt10/index.html
The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:
1. Improvement of "EYE DETECTION AF" speed when used with XF90mmF2 R LM WR
"EYE DETECTION AF" speed is improved when used with XF90mmF2 R LM WR in case that "FACE DETECTION" and "EYE DETECTION AF" are ON in "AUTO FOCUS SETTING" of the Shooting Menu.
2. Operational improvement of Fn1 Function button (Default setting : movie shooting)
The shortcut function to Fn1 BUTTON SETTING by pressing the button more than 2 sec. is removed. To avoid accidentally pressing the button when turning the Exposure compensation dial, pressing the button approx. 0.5sec. is required to start the function allocated to the button. This improvement is to avoid unexpected appearance of the SETTING when Fn1 function is needed.
<Note-1>
Functions of Fn2 through Fn7 button remain same.
<Note-2>
Steps to change the setting of Fn1 are same as usual like below.
・Change it in the function(Fn) setting menu appeared by pressing DISP/BACK button for a while.
・Change it through Setup Menu>BUTTON/DIAL SETTING>FUNCTION (Fn) SETTING.
3. Angle difference between jpeg image and jpeg image converted from RAW file
Currently, there is angle difference between jpeg image (including jpeg images converted in a camera) and jpeg image converted from RAW file by RAW FILE CONVERTER EX2.0 etc. The jpeg image angle converted from RAW file is a little bigger.
With this upgrade, the jpeg image angle is matched to one which is converted from RAW file. This symptom happens only when lenses below is used. In case of zoom lenses, this happen in wide-angle side.
　
XC16-50mmF3.5-5.6 OIS, XC16-50mmF3.5-5.6 OIS Ⅱ, XF18-55mmF2.8-4 R LM OIS,
XF10-24mmF4 R OIS, XF16-55mmF2.8 R LM WR, XF18-135mmF3.5-5.6 R LM OIS WR,
XF18mmF2 R and XF27mmF2.8
sinned79
Senior Member
Firmware Ver 1.01 for X-T10 is out
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt10/index.html
The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:
1. Improvement of "EYE DETECTION AF" speed when used with XF90mmF2 R LM WR
"EYE DETECTION AF" speed is improved when used with XF90mmF2 R LM WR in case that "FACE DETECTION" and "EYE DETECTION AF" are ON in "AUTO FOCUS SETTING" of the Shooting Menu.
2. Operational improvement of Fn1 Function button (Default setting : movie shooting)
The shortcut function to Fn1 BUTTON SETTING by pressing the button more than 2 sec. is removed. To avoid accidentally pressing the button when turning the Exposure compensation dial, pressing the button approx. 0.5sec. is required to start the function allocated to the button. This improvement is to avoid unexpected appearance of the SETTING when Fn1 function is needed.
<Note-1>
Functions of Fn2 through Fn7 button remain same.
<Note-2>
Steps to change the setting of Fn1 are same as usual like below.
・Change it in the function(Fn) setting menu appeared by pressing DISP/BACK button for a while.
・Change it through Setup Menu>BUTTON/DIAL SETTING>FUNCTION (Fn) SETTING.
3. Angle difference between jpeg image and jpeg image converted from RAW file
Currently, there is angle difference between jpeg image (including jpeg images converted in a camera) and jpeg image converted from RAW file by RAW FILE CONVERTER EX2.0 etc. The jpeg image angle converted from RAW file is a little bigger.
With this upgrade, the jpeg image angle is matched to one which is converted from RAW file. This symptom happens only when lenses below is used. In case of zoom lenses, this happen in wide-angle side.
　
XC16-50mmF3.5-5.6 OIS, XC16-50mmF3.5-5.6 OIS Ⅱ, XF18-55mmF2.8-4 R LM OIS,
XF10-24mmF4 R OIS, XF16-55mmF2.8 R LM WR, XF18-135mmF3.5-5.6 R LM OIS WR,
XF18mmF2 R and XF27mmF2.8
not necessary to update this right? haha
sinned79
Senior Member
I upgraded for item 3
i only used one of the lens above lol
johnnymiyake
Member
hi, what's the street price for this cam now?
my fren told me it is 2.9k riggint in MY, thats sub 1k sgd.
worth it? can get? warranty nor and issue, my fren help if needed.
my fren told me it is 2.9k riggint in MY, thats sub 1k sgd.
worth it? can get? warranty nor and issue, my fren help if needed.
I've been doing that for a while , raw+JPEG.
I use a 95mb/s Sandisk extreme pro card , nowhere as fast as the higher speed card that the X-T1 can utilize.
I do only notice some buffering time is needed when I shoot in continuous mode , not so much in single shots.
blurboiboi
Senior Member
not comfortable holding too long... even with the additional hand grip on... again that's my own experience...
Are yo trying to say Comex is selling the XT1 with 16-50 kit lens at $1,3xx and comes free with the 50-230 lens ?
Thanks
coolhirako
Senior Member
Shld be xt10 hahahah
Similar threads
