My very first 35mm contact print

[Verticoastro]

my very first contact print.

Ilford Multi grade paper, 10s exposure, f8. develop at 3mins, fix at 30sec.

 

[yamcake]

donno if its the scanning, but some of the frames are underexposed, and too contrasty.
light leaks at the edges of the film?

 

[zk-diq]

my very first contact print.

Ilford Multi grade paper, 10s exposure, f8. develop at 3mins, fix at 30sec.

you use glass frame or vacume frame? contact print is just for you to visual and judge your neg. can use it for decoration too. hee hee

 

[Verticoastro]

you use glass frame or vacume frame? contact print is just for you to visual and judge your neg. can use it for decoration too. hee hee

I use a glass... anyway... I planning to get it print big to 8x11... LoL..

 

[Verticoastro]

donno if its the scanning, but some of the frames are underexposed, and too contrasty.
light leaks at the edges of the film?

I think it is the scanner...

 

[sweat100]

I use a glass... anyway... I planning to get it print big to 8x11... LoL..

Yeah agreed. Print big... I just experienced 12x16 print, it looks good when your favourite print is enlarged.

 

[Verticoastro]

One of the enlarge print about 8x10"

 

[zk-diq]

One of the enlarge print about 8x10"

Hard copy is the best to feel. :thumbsup::thumbsup::thumbsup:

 

[ktan]

You develop your own negative and contact print? Impressive

 

[Verticoastro]

You develop your own negative and contact print? Impressive

Learn from school... still in the progress of perfecting it... LoL

 

[zk-diq]

Learn from school... still in the progress of perfecting it... LoL

Hmmm. .... Your fixing bath time a bit too short leh. With rapid fixer may need 2 to 5 minutes.

 

[Verticoastro]

Hmmm. .... Your fixing bath time a bit too short leh. With rapid fixer may need 2 to 5 minutes.

ok, noted, will fix at a longer timing as recommended by you... thanks...

 

[zk-diq]

ok, noted, will fix at a longer timing as recommended by you... thanks...

allo allo bro, not by me lah, but for std fixer solution is 10 min and above, rapid fixer will need 2 to 5 min as according to processing instruction. And if you want to keep for long, running/circulating water wash for 30 min or more with Hypo cleaner. I have print more than 35 years, no yellowish or stain appear.

 

[Verticoastro]

allo allo bro, not by me lah, but for std fixer solution is 10 min and above, rapid fixer will need 2 to 5 min as according to processing instruction. And if you want to keep for long, running/circulating water wash for 30 min or more with Hypo cleaner. I have print more than 35 years, no yellowish or stain appear.

oh, i see.. i using rapid fixer..

 

[Verticoastro]

My second print

 

[Verticoastro]

another print