My Diafine Project


Yep! And here is the first photo!


Plaubel Makina 67 with TriX @ ISO400

Pre-soak for 3 minutes with tap water at 28°C
Diafine Solution A for 4 min @ 28°C. 2 gentle Agitations
Quick rinse with tap water
Diafine Solution B for 4 min @ 28°C. 2 gentle Agitations
Rinse, Fix, Rinse, Ilfosol, Dry.

yam yam
very nice chicken
:thumbsup:
 

fyi. i use the following for diafine with good consistency and results:

5 mins pre-soak
5 mins in A, agitate about 3 times, each with 5 agitation
5 mins in B, agitate about 3 times, each with 5 agitation

What is different is I dilute my A and B solutions, 1+1. And I use it as single use, ie. i do not reuse.

the following iso are:

100, 200, 400, 800, 1600 and 3200.
diafine.jpg


i use tri-x around 800 - 1600.

Thanks alot for sharing. :D
 

fyi. i use the following for diafine with good consistency and results:

5 mins pre-soak
5 mins in A, agitate about 3 times, each with 5 agitation
5 mins in B, agitate about 3 times, each with 5 agitation

What is different is I dilute my A and B solutions, 1+1. And I use it as single use, ie. i do not reuse.

Doesn't that get expensive ? Even at 1+1, you'll have to use about 250 ml (original solution) of A & B to develop one roll. That works out to somewhat less than sixteen rolls per gallon of developer. Unless you regularly travel overseas to hand-carry from a low-cost supplier, just the shipping alone will be pretty steep !
 

Just tried TriX in Diafine. 3+3 with 2 single agitations every mins.

What you think?

5303031775_cc940769f3_z.jpg


5303615828_24158369b8_z.jpg
 

Last edited:
Just tried TriX in Diafine. 3+3 with 2 single agitations every mins.

What you think?

5303031775_cc940769f3_z.jpg


5303615828_24158369b8_z.jpg


Almost as good as black chicken soup, very nutritious! :thumbsup:
 

Anyone know where to get Diafine?
 

Back
Top