Ir?

[CYRN]

Hi,

juz managed to get the r72 filter and took my first IR shot today, but it did not turn out as I expected.

What am I missing here? :dunno: :dunno:

The result...

tia

 

[quekky]

must set custom white balance, see the sticky thread. u should have asked me just now

 

[CYRN]

didn't know the pix turn out this way...cuz didn't see the preview. that's why I didn't ask anyone juz now.

does WB differs that much? in the final pix... then what if I shoot RAW?

 

[eawtan]

If u shoot raw, during the conversion, set color temp to ~ 2000K

didn't know the pix turn out this way...cuz didn't see the preview. that's why I didn't ask anyone juz now.

does WB differs that much? in the final pix... then what if I shoot RAW?

 

[azul123]

If u shoot raw, during the conversion, set color temp to ~ 2000K

How can I set color temp on D70? or is there a setting for color temp on D70?

../azul123

 

[CYRN]

If u shoot raw, during the conversion, set color temp to ~ 2000K

okie... thanks

try again later ;p

 

[CYRN]

How can I set color temp on D70? or is there a setting for color temp on D70?

../azul123

he ment set the temp during post processing when using the RAW conversion software.

 

[Voix]

just try to shot the tree or green scenary,then you can see the difference...!

 

[azul123]

he ment set the temp during post processing when using the RAW conversion software.

I used Nikon Capture to convert raw to jpeg and tried searching but could not find colour temperature settings. :sweat:

../azul123

 

[eawtan]

With NC 4.2.0, Tool Palette 2, Under White balance, you can set "Set Color Temperature", then select "Standard Flo", with the "Warm White 3000K", and adjust the slider down to 2610K (towards the cooler section).

2610K is abit too high for me, I typically go down to ~2200K using Adobe ACR or GIMP (w/ UFRAW)

I used Nikon Capture to convert raw to jpeg and tried searching but could not find colour temperature settings. :sweat:

../azul123

 

[eawtan]

Using NC4.2 to convert with 2610K image compare to ACR 2000K image.


NC : http://img281.echo.cx/img281/7976/dsc1480nc0vb.jpg

ACR : http://img281.echo.cx/img281/8107/dsc14802ep.jpg

 

[azul123]

With NC 4.2.0, Tool Palette 2, Under White balance, you can set "Set Color Temperature", then select "Standard Flo", with the "Warm White 3000K", and adjust the slider down to 2610K (towards the cooler section).

2610K is abit too high for me, I typically go down to ~2200K using Adobe ACR or GIMP (w/ UFRAW)

Thanks, will try it out.

../azul123

 

[azul123]

When I changed the Warm White 3000K to 2610K the photo turned out redish... must have done something wrong.

I did try to make some adjustments on a photo I took and PP it but overall picture is effected.

http://forums.clubsnap.org/showthread.php?p=1327976#post1327976

../azul123