Hasselblad 503cxi - Problem

[basherbomb]

Hi

I have a problem with my Hasselblad 503cxi.

After focusing on my subject through the viewfinder, I took the shot. The camera was flat on a surface (floor).
However when I process my film all my shots that were in focus in the viewfinder, just went totally out of focus. (as seen in the picture above)

Could this be due to a camera or lens focusing problem?

 

[CNEOS1D]

<img src="http://www.clubsnap.com/forums/attachment.php?attachmentid=10994"/> Hi I have a problem with my Hasselblad 503cxi. After focusing on my subject through the viewfinder, I took the shot. The camera was flat on a surface (floor). However when I process my film all my shots that were in focus in the viewfinder, just went totally out of focus. (as seen in the picture above) Could this be due to a camera or lens focusing problem?

May be your film issue ,

 

[catchlights]

check is the focusing screen sitting properly.

 

[barnabas2]

Hi,

check if the film is loaded properly , use another magazine to confirm it is not a back issue

hope is help

 

[basherbomb]

Hi.

Thanks for the help. This problem only happens at around f2.8 to f4. My shots on f11 are perfectly sharp.
Still a back problem?

 

[catchlights]

Hi.

Thanks for the help. This problem only happens at around f1.8 to f4. My shots on f11 are perfectly sharp.
Still a back problem?

Wow!! which Hasselblad lens has f1.8??

 

[basherbomb]

Opps. Sorry was typing on the bus. F2.8