sorry but wahtas mirror up?
does a higher F stop make it sharper? aperture dun affect sharpness rite
If you did not enable this mirror lock up, when you use your telephoto lens and the 2 sec timer shutter release, at the shutter release.open, the mechanical shake caused by the reflex mirror action can affect the photo sharpness.
it is the same if you use close up or Macro lens
I suggest you go to your camera instruction manual , under Index -- look for Mirror Lockup and read up.
For me in night photography for landscape(tripod is a must have), I will always use Manual mode. Play with your WB, Aperture(F8~F11), shutter speed, picture style set to landscape and iso settings.
I will auto focus on the scene, then switch off IS on lens(if on tripod).
If you are comfortable with manual focusing switch to manual and try.
Continue to shoot. I am also new to DSLR and there is a lot more to learn.
Went back there to give a 2nd TRY !
#1
22" / ISO 400 / F22
![]()
#2
15"/ ISO200/ F8.0
![]()
#3
10"/ ISO100 / F10.0
![]()
I feel that its sharper than my first day.. what you guys think.. but exposure i still need to practice more i guess.
So can i just enable this mirror mode.. permanently. will it affect day shot?
looks sharper now. what did u do? btw u might want to try to increase the shutter speed to lower the exposure. abit too bright for night shoots.
thanks...~ if i use manual mode i cann't adjust exposure rite.. its auto...
i was thinking to use iso 100 cos i was on tripod to make it as sharp as possible.. but advice taken! will try iso 400 in future.
thanks...~ if i use manual mode i cann't adjust exposure rite.. its auto...
i was thinking to use iso 100 cos i was on tripod to make it as sharp as possible.. but advice taken! will try iso 400 in future.
looks sharper now. what did u do? btw u might want to try to increase the shutter speed to lower the exposure. abit too bright for night shoots.
thx for advise.. but i did use a tripod..
i use the platform there as a tripod.. cos i think my tripod is too light and there was wind..
was using U6600... can recommend any upgrade for this?