EXPOSE yourself - XCI


Status
Not open for further replies.
think these are the last 2...
5246717800_e9fa51e65a_z.jpg


5246718626_2301850f8c_z.jpg

was so tired when we reach here... didn't want to go down, but i see leong go down the cooling water, i got tempted :bsmilie:
 

bryan, i print screen the process for the basic IR conversion for the file... hope this helps.

open raw file in ACR
5246154689_31c9a318ea_o.jpg


adjust exposure, then use the WB eyedrop to drop on part that should be white. but there is a limit in the ACR colour temperature so it won't turn completely white. should look something like this
5246756592_9fed1ec3cd_o.jpg


then go auto colour you will get something like this
5246153659_3c248209c9_o.jpg
 

then next is the channel swap... 1st the red channel, change the RED from 100-0 and the BLUE from 0-100. you will get something like this...
5246755754_83791ce10c_o.jpg


then next is the blue channel, change the RED from 0-100 and BLUE from 100-0 and you will get something like this...
5246755366_e6c736b039_o.jpg
 

these are the basic steps for converting the raw file and channel swap. after this usually i play around with nik software Colour Efex to tweak the colours, contrast. then if the colour not consistent i use Viveza to selectively adjust the colour... quite tedious if you want to get it right... easier way is as Master Sion and NM suggested, can desaturate the area you want the leaves white by masking... hope this helps :)
 

these are the basic steps for converting the raw file and channel swap. after this usually i play around with nik software Colour Efex to tweak the colours, contrast. then if the colour not consistent i use Viveza to selectively adjust the colour... quite tedious if you want to get it right... easier way is as Master Sion and NM suggested, can desaturate the area you want the leaves white by masking... hope this helps :)

Thanks bro.! It does.. actually i got all correct except for the WB eyedrop part.. Will try to play ard more.. :)
 

Thanks bro.! It does.. actually i got all correct except for the WB eyedrop part.. Will try to play ard more.. :)
:) when you get the front part correct, then shouldn't be a problem already...
 

just got home a while ago, went to bbb watch for my mother's birthday :)
 

just got home a while ago, went to bbb watch for my mother's birthday :)

Very filial...:thumbsup:

Got try shoot the watch?
Been trying to shoot some watch on shiny black marble. but just can't get the lighting right.
 

Last edited:
Very filial...:thumbsup:

Got try shoot the watch?
Been trying to shoot some watch on shiny black marble. but just can't get the lighting right.

Try snooting the light with a black tent all around.
 

Very filial...:thumbsup:

Got try shoot the watch?
Been trying to shoot some watch on shiny black marble. but just can't get the lighting right.

nope, it is not a rock or a cat. :bsmilie:
 

Today is another wet outing. :bsmilie:
 

Status
Not open for further replies.
Back
Top