CS bicycles and cyclist thread

[Dark Lord]

To build trust and bonding in this community we got to get to know one another better.
How about telling us what kind of riding experience you have been through and what bike
are you riding now? Perhaps share with us what would you like to invest in when you are
going to get your next bike. Cheers for joining us in this thread.

Encouraging you to accomplish some cycling experience each day.
Believe you can do it for your belief is your inward conviction to the
activity of cycling.

Actually I'm very new to cycling
I used to be a motorcycle enthusiast but since my accident last April which fractured my left leg and left ribs, I've since turn to cycling which I want to make it not just as a hobby.. But as a weekly routine as well
I've yet to cycle since my accident as I had to use crutches, but thankfully I'm able to walk on my own since last Monday..
My first bike was back in '94 which I got as a birthday present,a Shimano MTB
My second one was a full suspension MTB, can't remember the brand,I've sold it to my buddy
My current set of wheels is a Hybrib/Crossbreed which I bought at Giant superstore, Aloeca Crossbreed which is their in-house brand(I'm sorry, I dunno how to post pics!! :sweat
I plan to cycle at least once a week at the nearby Chinese Garden park connector, hoping to meet west siders from here
I don't think I'll be changing/getting a new bike for the time being, but if I have to change I might wanna get something similar to the one I have now

PS : U guys can call me Faizal also, other than my nick... And thanks Forward for the link..

 

[Old Boy]

I'm just scared that I might burst the tyres

I always pumped my bike to the highest pressure recommended for minimal rolling resistance. If you like speed and minimal effort or long distance, then high pressure is great. Unless doing long downhill and your bike using rim brakes, then avoid high pressure as the heat from braking will cause the air to expand further and burst the tires. Lower pressure for off road is recommended. Better grip and comfort.

 

[Dark Lord]

I always pumped my bike to the highest pressure recommended for minimal rolling resistance. If you like speed and minimal effort or long distance, then high pressure is great. Unless doing long downhill and your bike using rim brakes, then avoid high pressure as the heat from braking will cause the air to expand further and burst the tires. Lower pressure for off road is recommended. Better grip and comfort.

Ok noted, thnks a lot...

 

[canonmono]

Actually I'm very new to cycling
I used to be a motorcycle enthusiast but since my accident last April which fractured my left leg and left ribs, I've since turn to cycling which I want to make it not just as a hobby.. But as a weekly routine as well
I've yet to cycle since my accident as I had to use crutches, but thankfully I'm able to walk on my own since last Monday..
My first bike was back in '94 which I got as a birthday present,a Shimano MTB
My second one was a full suspension MTB, can't remember the brand,I've sold it to my buddy
My current set of wheels is a Hybrib/Crossbreed which I bought at Giant superstore, Aloeca Crossbreed which is their in-house brand(I'm sorry, I dunno how to post pics!! :sweat
I plan to cycle at least once a week at the nearby Chinese Garden park connector, hoping to meet west siders from here
I don't think I'll be changing/getting a new bike for the time being, but if I have to change I might wanna get something similar to the one I have now

PS : U guys can call me Faizal also, other than my nick... And thanks Forward for the link..

i cycle ard west side with my brompton, maybe we shd cycle ard sometime, best to cycle ard evening as when you are indirectly challenging someone and he challenge you back, the only time i hit 32km/h reading on my meter with my 16 inches wheel on straight path .. Best experience is a malay guy riding leisurely in BMX when i pick up speed and tried to overtake him and he noticed and pick up speed, so we ended up racing on the PCN path ..

 

[Dark Lord]

i cycle ard west side with my brompton, maybe we shd cycle ard sometime, best to cycle ard evening as when you are indirectly challenging someone and he challenge you back, the only time i hit 32km/h reading on my meter with my 16 inches wheel on straight path .. Best experience is a malay guy riding leisurely in BMX when i pick up speed and tried to overtake him and he noticed and pick up speed, so we ended up racing on the PCN path ..

I'm taking it slow for now,coz I still feel a little pain on my left leg while walking.. So it'll just be a leisure cruise for now

 

[n0eln0el]

Got a questions about the rims and tires

below is the current setup:
Rims - 20h front / 24h rear Equation R17 Aero Doublewall w/ machined braking surface
Tires - Kenda Kwick Trax w/ puncture resistant K-shield 700x32c

Anybody can help explain what does the "20h front / 24h rear" means?
Also, how would I know if I can use a 700x26 or even 700X23 tires?

 

[petetherock]

Rodalink Singapore sells for about 750
http://sg.rodalink.com/catalog/inde...d=Helios F300&description=true&product_id=196

You might check if the price is negotiable.

Ryan

Hey there is a sale on now, they are selling for sl under $700 - deal?

I need something that can be used for comfortable riding, fit a basket / rear rack and lights, for road work at Pierce and East Coast.

Or will a foldable or other options suit me?

Cheers

 

[forward]

Hey there is a sale on now, they are selling for sl under $700 - deal?

I need something that can be used for comfortable riding, fit a basket / rear rack and lights, for road work at Pierce and East Coast.

Or will a foldable or other options suit me?

Cheers

All bikes can be fitted with basket, rear rack and lights for road work not
only at Pierce and East Coast but all pavements with smooth surface
all over the island without much problem. The question is for you to
find out how much of a weight you want to carry on your basket and rear
rack as there is some differences between a bike with 26" vs 20" wheel set.

Next you have to consider whether you want to bring your bike along if
you are going for another holiday or you want to be more adventurous
in exploring places like covering 60km or more and want to take the
cab home instead of having to pedal the bike back. If this is the case,
it is obvious the foldable with the smaller wheel.

While on the other hand, you may suddenly find a renew passion for more
cycling activity with new group of cycling friends and buddies that you are
very comfortable with, then you will find the 26" bike more suitable.

Cheering you to renew your cycling activity
Think and cycle out of the box. With two wheels you will travel.

:thumbsup:

 

[Old Boy]

Got a questions about the rims and tires

below is the current setup:
Rims - 20h front / 24h rear Equation R17 Aero Doublewall w/ machined braking surface
Tires - Kenda Kwick Trax w/ puncture resistant K-shield 700x32c

Anybody can help explain what does the "20h front / 24h rear" means?
Also, how would I know if I can use a 700x26 or even 700X23 tires?

20h - 20 spokes (h for holes ) and 24 spokes rim for rear. This bike is hybrid and can take 700x28c. Not sure about 26 or 23, you need to check with bike shop.

 

[Old Boy]

Hey there is a sale on now, they are selling for sl under $700 - deal?

I need something that can be used for comfortable riding, fit a basket / rear rack and lights, for road work at Pierce and East Coast.

Or will a foldable or other options suit me?

Cheers

The bike don't have eyelet for rear rack, so you can only install seatpost clamp rear rack.

 

[petetherock]

Went to try the Polygon F300R....
Didn't like the fit, although they seem to give good parts...

Also tried the Marin Sausilito... better fit.. but more expensive at $853 before discount.

Decided to visit Tay Cycle

Specialised Sirrus:

Specialized Sirrus 2011 Specifications

Frame: Specialized A1 Premium aluminium, fully manipulated tubing, smooth weld compact design, internal cable routing, integrated headset, fender and rack eyelets
Front Fork: Straight blade steel fork with Fender and rack eyelets
Rear Shock:
Front Derailleur: Shimano, dual pull, top swing
Rear Derailleur: Shimano Altus
Number of Gears:
Shifters: Shimano EF-51, EZ Fire
Chainset: Shimano FCM131
Chainrings: 48 x 38 x 28T with chainguard
Bottom Bracket: Sealed cartridge, square taper, 68mm
Cassette: SRAM, 7-speed, 12-32t
Chain: KMC Z-7, 12″ x 3/32″
Pedals: Nylon flat pedal with reflectors
Front Brake: Die cast aluminium, 108mm linear pull
Rear Brake: Die cast aluminium, 108mm linear pull
Brake Levers: Shimano EF-51 integrated with shifter
Handlebars: Alloy flat bar, 25.4mm
Stem: Alloy, CP bolt, 25.4mm
Headset: 1 1/8″ sealed Cr-Mo bearings integrated with headset, 20mm alloy cone spacer with 20mm of spacers
Grips: Body Geometry Comfort Grips
Rims: Alex AS-14, double wall
Front Hub: Forged alloy, sealed, Quick Release, 32 hole
Rear Hub: Forged alloy, double-sealed, cassette, Quick Release, 32 hole
Front Spokes: Stainless 14g
Rear Spokes: Stainless 14g
Front Tyre: Specialized All Condition Sport, 700x32c, wire bead, 60TPI with Flak Jacket protection
Rear Tyre: Specialized All Condition Sport, 700x32c, wire bead, 60TPI with Flak Jacket protection
Tubes: Standard presta valve
Saddle: Body Geometry Riva Road, 155mm width
Seatpost: Alloy, two-bolt clamp, 30.9mm
Seat Binder: Alloy, 31.8mm
Weight: Approx. 26.25lbs (11.91kg) for the Large Size
Colour:
Extra Features: Chain stay protector, chain catcher, derailleur hanger, clear coat

The parts seem to be more inferior but the red color is very nice...

Got the price down to $800, but when you add lights, rack etc it gets close to $990!!!

Any opinions on this?

 

[forward]

Pete, when you mentioned about "better fit" what do you mean by that?
Perhaps you can give us more detail regarding this area so that the folks
here can give you some of their opinions. Fitting can concern areas like,
seat post, size of the bike, reach, height of the handle bar, frame, stem,
headset etc., etc., Who is the person who give you the "fitting"? Did you
rode on the bike for a while for the fitting?

As for having additional accessories like lights, racks etc the extra $190/-
is a small sum to pay. You can ask the LBS to give you individual price for each
and every item. Some better quality rear lights alone cost $40 while the front
light can cost $65/- each - all depends on the quality you're paying for.

If you are adding a meter to check your speed, the wireless Cateye model
can cost you around $85.

The picture shows the wrong fix for the front basket to this front suspension
MTB. The two supporting bars of the basket were fixed to the fork rendering
it ineffective. I got once fixed this way by the LBS. Later when I learn about
the mistake, I changed to a different type of basket that is designed for MTB
with front suspension.

 

[forward]

Me seldom ride off road though I love to. Maybe when work not that busy. Types of bikes I own now :
1 alu full sus MTB
1 Ti full sus MTB
1 Alu hardtail MTB
1 Ti road bike
1 Alu road bike
1 Alu folding bike
1 Alu full sus folding bike and lastly
1 Cromoly touring folding bike coming soon

anyone here is good in taking stitching shot ? Maybe can learn something when we meet.

Old Boy, that is what I call commitment in doing something and in this
case it is cycling. You are doing it with passion and wants to learn
as much as you can as well as getting the experience in riding on different
types of bike.

At the moment am having three hardtails, one 20" foldable and one street
bike. Gave away my road bike and the hybrid. As for stitching shot, you can
google it to find your answer.

 

[forward]

Actually I'm very new to cycling
I used to be a motorcycle enthusiast but since my accident last April which fractured my left leg and left ribs, I've since turn to cycling which I want to make it not just as a hobby.. But as a weekly routine as well
I've yet to cycle since my accident as I had to use crutches, but thankfully I'm able to walk on my own since last Monday..
My first bike was back in '94 which I got as a birthday present,a Shimano MTB
My second one was a full suspension MTB, can't remember the brand,I've sold it to my buddy
My current set of wheels is a Hybrib/Crossbreed which I bought at Giant superstore, Aloeca Crossbreed which is their in-house brand(I'm sorry, I dunno how to post pics!! :sweat
I plan to cycle at least once a week at the nearby Chinese Garden park connector, hoping to meet west siders from here
I don't think I'll be changing/getting a new bike for the time being, but if I have to change I might wanna get something similar to the one I have now

PS : U guys can call me Faizal also, other than my nick... And thanks Forward for the link..

Posting of pictures in this forum

I only know of one method:

1. Open an account with photobucket
2. Post picture with size e.g. 800 x600
3. Copy the IMG code and paste it here.
4. Picture will appear when you "submit reply" for this forum.

There maybe other photo sites that can be used, I'll leave it for other
members to contribute their experiences regarding posting pictures in
this forum.

 

[forward]

Got a questions about the rims and tires

below is the current setup:
Rims - 20h front / 24h rear Equation R17 Aero Doublewall w/ machined braking surface
Tires - Kenda Kwick Trax w/ puncture resistant K-shield 700x32c

Anybody can help explain what does the "20h front / 24h rear" means?
Also, how would I know if I can use a 700x26 or even 700X23 tires?

Sorry, I've not got the slightest idea on this too.
Can any other cyclists give us some clues.
What bike are you looking at that has this configuration for the wheel set?

 

[Dark Lord]

Btw did any of u guys here went to bikers hub Jurong East last sun evening around 7pm?

 

[forward]

Btw did any of u guys here went to bikers hub Jurong East last sun evening around 7pm?

Dark Lord, when you asked a question like that without giving more details, it is scary for people who comes to the
forum for the first time to learn more about cycling. You should state your purpose of the desire to know.
Were you there at that time? If you were there, what is your purpose. You can also tell us whom you think you
recognized. This will give more creditability to yourself and the community here will feel you are trustworthy and
relationship will soon grow. Soon, when rides are organised in the near future, you will not be with strangers.
Just my thoughts at the moment in ways to build trust and bonding in the cycling community at clubsnap.

 

[petetherock]

@ forward:

I like to ride upright, and if I had an old chopper, that would be better!

The Polygon was set up like a racer, and it hurts my back to lean forward like that.
My butt was higher than the front - not my style...

In fact, this one looks nice:

But it costs even more than the Sirrus !

 

[Dark Lord]

Dark Lord, when you asked a question like that without giving more details, it is scary for people who comes to the
forum for the first time to learn more about cycling. You should state your purpose of the desire to know.
Were you there at that time? If you were there, what is your purpose. You can also tell us whom you think you
recognized. This will give more creditability to yourself and the community here will feel you are trustworthy and
relationship will soon grow. Soon, when rides are organised in the near future, you will not be with strangers.
Just my thoughts at the moment in ways to build trust and bonding in the cycling community at clubsnap.

I was there, saw three guys later while waiting for my fren to change his pedal at dat shop.. I was wondering if the guys are from here, coz I've not met anyone from here before

 

[n0eln0el]

@ forward:

I like to ride upright, and if I had an old chopper, that would be better!

The Polygon was set up like a racer, and it hurts my back to lean forward like that.
My butt was higher than the front - not my style...

In fact, this one looks nice:

looks like a trek valencia