Canon EOS 450D Club -TCSS Lim Kopi Session: Season 10
- Thread starter jlkk76
- Start date
- Status
Make sure you wear a mask! Hahahaha!
I don't dare to develop the TFCD roll of film, I just screwed up another roll of film. Hahahaha.
Exposed Tri-X (ISO400) at ISO3200, 24ºC, 4 slow inversions first 20 seconds, 1 slow inversions every minute, 12 minutes.
It should be around 22-26 minutes, not 12. So almost all my negatives were near pitch-black. Stupid Kodak manufacturers timings for Tri-X was wayy off.
After doing more read ups on the net, I realised I just processed my film at ~ISO800 ....
I'll do more read ups before doing my chemistry tonight for that TFCD roll.
Only managed to salvage the shots not taken under available light,
I don't dare to develop the TFCD roll of film, I just screwed up another roll of film. Hahahaha.
Exposed Tri-X (ISO400) at ISO3200, 24ºC, 4 slow inversions first 20 seconds, 1 slow inversions every minute, 12 minutes.
It should be around 22-26 minutes, not 12. So almost all my negatives were near pitch-black. Stupid Kodak manufacturers timings for Tri-X was wayy off.
After doing more read ups on the net, I realised I just processed my film at ~ISO800 ....
I'll do more read ups before doing my chemistry tonight for that TFCD roll.
Only managed to salvage the shots not taken under available light,
Last edited:
Make sure you wear a mask! Hahahaha!
I don't dare to develop the TFCD roll of film, I just screwed up another roll of film. Hahahaha.
Exposed Tri-X (ISO400) at ISO3200, 24ºC, 4 slow inversions first 20 seconds, 1 slow inversions every minute, 12 minutes.
It should be around 22-26 minutes, not 12. So almost all my negatives were near pitch-black. Stupid Kodak manufacturers timings for Tri-X was wayy off.
After doing more read ups on the net, I realised I just processed my film at ~ISO800 ....
I'll do more read ups before doing my chemistry tonight for that TFCD roll.
Only managed to salvage the shots not taken under available light,
:bigeyes:
Hardcore. Why so hardcore? :sweat:
Act hardcore only luh. :S
Alright, did some calculations for timings for my Tri-X (400) exposed at ISO100.
(Because Kodak timings for Tri-X in HC110 is wayyy off)
Old version Tri-X at 400 20ºC = 7minutes 30seconds
Old version Tri-X at 200 20ºC = 6minutes 45seconds
Which is about 10% off time.
Old version Tri-X at 400 20ºC = 7minutes 30seconds
New version Tri-X at 400 20ºC = 6minutes 30seconds
Which is about 15% off time.
Kodak timings for new Tri-X at 400 20ºC = 3 minutes 45seconds!?
---------
Old version Tri-X at 400 24ºC = 5minutes 00seconds
Old version Tri-X at 200 24ºC estimate = 4minutes 30seconds
New version Tri-X at 200 24ºC estimate = 3minutes 50seconds
New version Tri-X at 200 24ºC estimate with Dilution H = 7minutes 40seconds
Roughened out numbers = 7minutes 15seconds at 24ºC, hope everything comes out alright.
Time to put on the doctor's coat and do some chemistry.
Results in by 7pm.
Last edited:
jlkk76
Senior Member
great man haha chem experiment worked =DJust processed the film, maybe a little overdeveloped or overexposed. Now have to soak in water for a few hours to get rid of the purple/pink tint.
Yay.
Might not be the perfect development, but acceptable results for scans
Extremely happy to see the images appear on my negatives like normal again! Not like blank or empty negatives caused by improper loading or underdevelopment!
About an hour or two to dry, then its time for scanning!
Just worried about the tones, hopefully the contrast didn't go wayy low or it'll just become one gray square.
eleveninth
Senior Member
use scotchtape.
Brilliant!
Apple Resellers or Challenger.
But why do you need a protector for? IMO, I find it irritating. ;p
ROFL. Haha!
End up not using it.
jlkk76
Senior Member
jlkk76
Senior Member
got ur BBB stuff le mah?
eleveninth
Senior Member
Haven. been busy with work.
@eleveninth: how's the deal that I pm-ed you? No rush in deciding but I have ready stocks to deal.
ya i saw. Looks good but it's not a priority right now. Thanks tho. :thumbsup:
eleveninth
Senior Member
No problem.
When you want it just let me know...
this yr abit hard. As u know no more mid yr, and there's news that there wont be yr end also. so abit sien. will see how the situation comes about.
- Status
