[ Announcement ] Olympus OM-D E-M5 firmware 1.5


Just to inquire, do we need to switch on "half way press IBIS" to enable IBIS? Or switching off will also enable IBIS only when you click the shutter?

When it's on, u will see IBIS stabilizing the image the moment shutter button is half-pressed, this helps u to focus easier when shooting macro or using long lens or when focusing in magnified view. If it's off, IBIS will only stabilize image when shutter is fully-depressed, u won't see the stabilizing effect. I like to have it on to reduce stress on my eyeballs :bigeyes: .... but it drains more juice from battery :hung:
 

Thanks for the info guys. :)
 

Yup....can testify that with v1.5, humming sound is gone. Although u can hear the IS working when u move the camera. With 1.3, the humming sound is still there.
 

Yup....can testify that with v1.5, humming sound is gone. Although u can hear the IS working when u move the camera. With 1.3, the humming sound is still there.

the humming sound really sounds like eating alot of battery
 

As7eroidS said:
the humming sound really sounds like eating alot of battery

No. :-) Why?
 

Not sure if Olympus Service centre will help to upgrade firmware. I have been trying to download the firmware on my Em-5 but always failed.
Still in 1.1verison. Haiz....
 

Not sure if Olympus Service centre will help to upgrade firmware. I have been trying to download the firmware on my Em-5 but always failed.
Still in 1.1verison. Haiz....

The download from their server is really wanky.
 

Not sure if Olympus Service centre will help to upgrade firmware. I have been trying to download the firmware on my Em-5 but always failed.
Still in 1.1verison. Haiz....

It takes about 15-20 min. Have patience. And make sure your battery is full when you start.
 

Thanks for the heads up guys.

Updated mine from 1.1 to 1.5, took less than 15min total to complete the upgrade (im using mac). Will observe in a couple of usage if battery lifes really improves.
 

Thanks for the heads up guys.

Updated mine from 1.1 to 1.5, took less than 15min total to complete the upgrade (im using mac). Will observe in a couple of usage if battery lifes really improves.
I'm looking forward to your report.
 

JW73 said:
Not sure if Olympus Service centre will help to upgrade firmware. I have been trying to download the firmware on my Em-5 but always failed.
Still in 1.1verison. Haiz....

Make sure you have high speed broadband. Better if you have fibre broadband. The file size for ver 1.3 and 1.5 is about 50mb each. Even on my cable modem with 50mbps, it took about 15-20 mins to download.

Then, make sure you are on Olympus software updater ver 1.03

Good luck!
 

fyi. I used the latest ver 1.04 to update.
 

The humming sound is not gone but much softer. I can still hear it when I use the EVF (or when my ears are near to the camera)...


Yup....can testify that with v1.5, humming sound is gone. Although u can hear the IS working when u move the camera. With 1.3, the humming sound is still there.
 

I'm glad so many people are doing beta tests for me. :)
 

Last edited:
The humming sound is not gone but much softer. I can still hear it when I use the EVF (or when my ears are near to the camera)...

Humming sound is very loud when you half press the shutter using the EVF .. goes away with the release of the button .. I could hear it on the street while shooting using the EVF
 

Humming sound is very loud when you half press the shutter using the EVF .. goes away with the release of the button .. I could hear it on the street while shooting using the EVF

Only when you use the EVF?
 

Only when you use the EVF?

The sound is present whether if you use EVF or the LCD .. because of the closeness when you focus using EVF .. the sound is right next to your ear
 

Seriously? You all can actually hear the humming sound?
I must be old liao, ears lousy. I can only hear the humming sound when I press my ears against the camera, or in a dead silent room.

At least that's ONE good thing about growing old. ;)
 

Back
Top