Akan Datang~! High res Drum scanning up to 4 x 5 Negs/trans

[kex]

Due to many enquiries on MF cum panaromic scanning,i have invested in a Imacon Drum scanner.
Pricing will be at least 40% off Pro lab for CS members!
anything from X pan format till 4x5 can be drum scanned.
Still in the process of setting up and learning how to operate it.



Regards

 

[pureflow]

imacon not drum lah.. howteks are then drum scanner..... imacon is LED.. what did you get? can you scann 35mm full frame? cuz I know some imacon got problem scanning full frame.

 

[pureflow]

imacon not drum lah.. howteks are then drum scanner..... imacon is LED.. what did you get? can you scann 35mm full frame? cuz I know some imacon got problem scanning full frame.

eh how much you get for it ah? US$15k?

 

[morganoh]

Due to many enquiries on MF cum panaromic scanning,i have invested in a Imacon Drum scanner.
Pricing will be at least 40% off Pro lab for CS members!
anything from X pan format till 4x5 can be drum scanned.
Still in the process of setting up and learning how to operate it.



Regards

I just finish my wedding photography therefore I have 40 4x5 negative to be scan.

Can I find out how much will it cost me?

Thank you
Morgan

 

[yaoxing]

Kex, you're that young man in Bedok Photo Studio at Blk 89 arh? I often go there....

Oops... OT.. :embrass:

 

[hongsien]

Due to many enquiries on MF cum panaromic scanning,i have invested in a Imacon Drum scanner.
Pricing will be at least 40% off Pro lab for CS members!
anything from X pan format till 4x5 can be drum scanned.
Still in the process of setting up and learning how to operate it.
Regards

Great Man! Keep us posted!

Hong Sien

 

[kex]

eh how much you get for it ah? US$15k?

i bought a refurbished set from kodak which is cheaper, brand new is US$15k
the scanner performs a Virtual drum scanning by bending it over a drum to get an even scan.
this scanner can scan a 35mm full frame without any problem,the whole scanning area is up to 5 x 7,but i bring in this imacon mainly for panaromic and above..35mm still using another scanner.
having some conflict with the SCSI card.. :cry:
kodak professional guy will come nx week to rectify..
will work out the prices only after i master it

 

[kex]

Kex, you're that young man in Bedok Photo Studio at Blk 89 arh? I often go there....

Oops... OT.. :embrass:

yup,
nx time come and say hello la

 

[pureflow]

i bought a refurbished set from kodak which is cheaper, brand new is US$15k
the scanner performs a Virtual drum scanning by bending it over a drum to get an even scan.
this scanner can scan a 35mm full frame without any problem,the whole scanning area is up to 5 x 7,but i bring in this imacon mainly for panaromic and above..35mm still using another scanner.
having some conflict with the SCSI card.. :cry:
kodak professional guy will come nx week to rectify..
will work out the prices only after i master it

you need help? what's wrong with it.. I'm quite good with SCSI stuff as almsot everything of mine is also SCSI.

 

[kex]

my plextor writer oso running scsi,after installing my scanner,my Plextor drive suddenly change location,from drive E to J now...
when i try to perform a scan,there is a pop out warning say i have unsafely unplug my Hardware..
Any tips ??i'm running on win2000 Professional..
i checked the SCSI ID liao,both writer and scanner diff ID..

 

[pureflow]

my plextor writer oso running scsi,after installing my scanner,my Plextor drive suddenly change location,from drive E to J now...
when i try to perform a scan,there is a pop out warning say i have unsafely unplug my Hardware..
Any tips ??i'm running on win2000 Professional..
i checked the SCSI ID liao,both writer and scanner diff ID..

ok I need to know your SCSI controller..

your SCSI controller ID
CDRW ID
Scanner ID

also your interface Eg, U160/U320/UW/U2W. type of cables. and where did you terminate.. and the controller that you are using.. I believe you got somwhere along that line wrong..

er... think I might as well explain to you now..

for 16bit devices.. usually scanner.. your ID needs to be below 7.. your controller has to be 7 else the UW/ scsi-2 is not able to located the controller as the previous generation of controllers only allow up to 7 devices including the controller .. the 32/64bit controllers allow allocation up to 15 devices per channel.

then next is your CDRW/CDROM/DVDROM if it's not U2W/U160/U320, it then belongs to the old type..

note, even thou it's 68pin doesnt mean that it is.. it also depends on the cable.. eg, if you plug U160 68pin with a u2w 68pin cable, you still connect as u2w.

u160/u320 can be identified by looking at the cable.. the wires are twisted. the u2w are not twisted, they look like the UDMA cables.

now, the termination. the last device has to be terminated.

now.. if you are connecting the scanner via the external, the scanner needs to be terminated.

if you are lost let me know... haha......

 

[kex]

ok I need to know your SCSI controller..

your SCSI controller ID
CDRW ID
Scanner ID

also your interface Eg, U160/U320/UW/U2W. type of cables. and where did you terminate.. and the controller that you are using.. I believe you got somwhere along that line wrong..

er... think I might as well explain to you now..

for 16bit devices.. usually scanner.. your ID needs to be below 7.. your controller has to be 7 else the UW/ scsi-2 is not able to located the controller as the previous generation of controllers only allow up to 7 devices including the controller .. the 32/64bit controllers allow allocation up to 15 devices per channel.

then next is your CDRW/CDROM/DVDROM if it's not U2W/U160/U320, it then belongs to the old type..

note, even thou it's 68pin doesnt mean that it is.. it also depends on the cable.. eg, if you plug U160 68pin with a u2w 68pin cable, you still connect as u2w.

u160/u320 can be identified by looking at the cable.. the wires are twisted. the u2w are not twisted, they look like the UDMA cables.

now, the termination. the last device has to be terminated.

now.. if you are connecting the scanner via the external, the scanner needs to be terminated.

if you are lost let me know... haha......

:bigeyes: :bigeyes: :bigeyes: lost in space

thanks for ur advices,will show the kodak tech manager ur post.i abit IT idiot..
:bsmilie:

 

[SniperD]

:thumbsup: yeah!! upzzz for you :gbounce:

 

[pureflow]

:bigeyes: :bigeyes: :bigeyes: lost in space

thanks for ur advices,will show the kodak tech manager ur post.i abit IT idiot..
:bsmilie:

er. ok. i just tot that people who plays with scsi would know these.

 

[kex]

Pricing for Medium Format and 4 x 5 High quality Scan as below.

file size ard 30mb $5 each
files size ard 60mb $8 each
for bigger file size,pricing will be @ 15cts/mb
ie: a 100mb file will cost $15

Format available for scanning as below.
X-pan panaromic 24mmx65mm
6x4.5
6x6
6x7
6x9
4 x 5 (LF)
All files are in Tiff format given to you in a CD-rom.
Samples are available at my workplace only.


Regards
Boonwei
96828667

 

[yellowfinsg]

Yo Kex,

:thumbsup: :thumbsup: for the medium format scan! Finally manage to get my slides scanned into cd. :bsmilie: Thanx man. :vhappy: