Using command dial to control aperture


kababoom

Senior Member
Nov 23, 2004
8,480
4
38
Singapore, Singapore, Singapor
Hi bro is it normal to start with the smallest aperture when adjusting aperture using the dial it always starts from F22 can it be changed to start with the largest aperture instead on a X-T4 camera?
 

Should read camera manual, I think to check default settings of auto iso dial on left side and aperture dial on right side. Both dials should be set to A for full auto , same like P program on other brands. Here is a video.
@1.30 iso setting, @2.04 shooting settings , @ 3.00 for command dial.

Ps if you say it default to f22 then check default shooting menu, auto 1 - 3. Which is being used , set by command dial?