Multiple Exposures for Dynax 505si


Status
Not open for further replies.

TME

Senior Member
Hi, to all who have used the Dynax 505si, how do u expose for more that 2 exposures on one frame in multi expsoure mode? I don't understand what the manual is trying to say when they say repeat STEP 1 and 2.

When I set the camera to multiple exposure mode, the camera sets only for 2 exposures. Of course after u fire the first shot, and then the 2nd, the camera advances the film automatically. How do u do set the camera to fire more tha 4 times, especially 3 times? How many expsoures can be taken on one frame for the 505si? Unlimited?
 

for the case of Dynax 5, there is a function so as to set it to ME (mutiple exposure). Once you take a photo, the ME will blink for few seconds and then stay still. Take another one and ME will again blink. Now, if you want this to be the last shot, make sure you take it while ME is blinking... so you can actually control whether u want 3 or 4 or 5 shots.

As for the exposure, my manual states the exposure adjustment as follows:
1 shot = 0.0
2 shot = -1.0
3 shot = -1.5
4 shot = -2.0
5 shot = -2.5
6 shot = -3.0
 

Originally posted by stl
for the case of Dynax 5, there is a function so as to set it to ME (mutiple exposure). Once you take a photo, the ME will blink for few seconds and then stay still. Take another one and ME will again blink. Now, if you want this to be the last shot, make sure you take it while ME is blinking... so you can actually control whether u want 3 or 4 or 5 shots.

As for the exposure, my manual states the exposure adjustment as follows:
1 shot = 0.0
2 shot = -1.0
3 shot = -1.5
4 shot = -2.0
5 shot = -2.5
6 shot = -3.0

Thanks but this is not the case for my 505si. The first shot will lead the ME sign to blink and when I take the second, the camera just drive the flim to the next frame. From what I can understand of the manual, there is some procedure to repeat the ME feature but I can never get it done. Anyone else who has used a 505si and used its multiple exposure feature.
 

TME said:
Thanks but this is not the case for my 505si. The first shot will lead the ME sign to blink and when I take the second, the camera just drive the flim to the next frame. From what I can understand of the manual, there is some procedure to repeat the ME feature but I can never get it done. Anyone else who has used a 505si and used its multiple exposure feature.

when you fire the first shot. the ME blink. goto the dial and re-set the ME again. if you complete the 2 ME cycle, the camera will advance the flim.
 

TME said:
Hi, to all who have used the Dynax 505si, how do u expose for more that 2 exposures on one frame in multi expsoure mode? I don't understand what the manual is trying to say when they say repeat STEP 1 and 2.

When I set the camera to multiple exposure mode, the camera sets only for 2 exposures. Of course after u fire the first shot, and then the 2nd, the camera advances the film automatically. How do u do set the camera to fire more tha 4 times, especially 3 times? How many expsoures can be taken on one frame for the 505si? Unlimited?

u bring yr camera out, i show u better...i dont know how to explain here..
:bsmilie:

but i am not sure HOW mant times the 500si can take in ME...need to check yr manual.
 

Status
Not open for further replies.
Back
Top