sgcamerastore
Senior Member
Description
The BOYA BY-VM200 Mic is a shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders. Its super-cardioid accurately provides a very natural recording, while still offering a high level of rear rejection. In addition to the microphone's native 35Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The integrated shock mount conveniently mounts the BY-VM200 onto any camera accessory shoe while effectively suppressing handling and vibration noise. The 3.5mm plug is compatible with a wide variety of different cameras and audio devices. It can operate for up to 100 hours on 9V lithium or alkaline battery, allowing you to work in the field without constant replacements. Product Highlights · Broadcast-Quality Condenser Mic · Super-cardioid Polar Pattern · Integrated Shock Mount and Foam Windshield · Two step High Pass Filter (Flat/80Hz) · 1/4" Threaded Mount · 3.5mm Output Plug · Uses 9V Lithium or Alkaline Battery · Durable All Metal Construction Specifications: Type: condenser microphone (unidirectional) Polar pattern: Super-Cardioid Frequency Response: 35-20,000Hz Sensitivity: -34dB +/- 1dB / 0dB=1V/Pa, 1kHz Signal to Noise Ratio: 76dB or more Output Impedance: 200 Ohm or less Power: 9V alkaline battery Plug: mini-pin plug (3.5mm) Filter: Controlled by low-cut filter switch
The BOYA BY-VM200 Mic is a shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders. Its super-cardioid accurately provides a very natural recording, while still offering a high level of rear rejection. In addition to the microphone's native 35Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The integrated shock mount conveniently mounts the BY-VM200 onto any camera accessory shoe while effectively suppressing handling and vibration noise. The 3.5mm plug is compatible with a wide variety of different cameras and audio devices. It can operate for up to 100 hours on 9V lithium or alkaline battery, allowing you to work in the field without constant replacements. Product Highlights · Broadcast-Quality Condenser Mic · Super-cardioid Polar Pattern · Integrated Shock Mount and Foam Windshield · Two step High Pass Filter (Flat/80Hz) · 1/4" Threaded Mount · 3.5mm Output Plug · Uses 9V Lithium or Alkaline Battery · Durable All Metal Construction Specifications: Type: condenser microphone (unidirectional) Polar pattern: Super-Cardioid Frequency Response: 35-20,000Hz Sensitivity: -34dB +/- 1dB / 0dB=1V/Pa, 1kHz Signal to Noise Ratio: 76dB or more Output Impedance: 200 Ohm or less Power: 9V alkaline battery Plug: mini-pin plug (3.5mm) Filter: Controlled by low-cut filter switch